首页 | 本学科首页   官方微博 | 高级检索  
     

镍钴对超细Ti(C,N)基金属陶瓷性能的影响
引用本文:张红芹,刘宁,宋瑞颖,刘忠伟,蔡威.镍钴对超细Ti(C,N)基金属陶瓷性能的影响[J].硬质合金,2008,25(4).
作者姓名:张红芹  刘宁  宋瑞颖  刘忠伟  蔡威
作者单位:合肥工业大学材料科学与工程学院,安徽合肥,230009
摘    要:研究了Co部分和全部代替Ni对超细Ti(C,N)基金属陶瓷性能的影响。采用X射线衍射仪对物相研究发现:金属相中w(Co)=10%和w(Co)=15%时,金属陶瓷中出现金属间化合物,并且有两种Co的同素异构体并存;力学性能测试表明:5%的Co取代5%的Ni可以明显提高金属陶瓷的抗弯强度、硬度和断裂韧性。金属相为10%Ni-5%Co时,材料的综合力学性能最好。

关 键 词:Ti(C  N)基金属陶瓷  粘结相  性能

Effect of Ni-Co on the Properties of Ultra-fine Grade Ti(C,N)-based Cermets
Zhang Hongqin,Liu Ning,Song Ruiying,Liu Zhongwei,Cai Wei.Effect of Ni-Co on the Properties of Ultra-fine Grade Ti(C,N)-based Cermets[J].Cemented Carbide,2008,25(4).
Authors:Zhang Hongqin  Liu Ning  Song Ruiying  Liu Zhongwei  Cai Wei
Affiliation:Zhang Hongqin Liu Ning Song Ruiying Liu Zhongwei Cai Wei(Department of Material Science , Engineering,He Fei University of Technology,Hefei Anhui 230009)
Abstract:The properties of ultra-fine grade Ti(C,N)-based cermets were studied,in which Ni was replaced by Co partly or fully as binder phase.The results of XRD show that the intermetallic compound and two kinds of Co isomers appear in the cermets when the Co content reaches 10% and 15%.The mechanical property tests indicate that 5% Ni replaced by 5% Co can obviously improve the bending strength,hardness and fracture toughness of cermets.The best mechanical properties are obtained in the material with the metallic p...
Keywords:Ti(C  N)-based cermets  binder phase  properties  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号