硅丙乳液在鳞片状无机富锌涂料中的应用 |
| |
引用本文: | 张留艳,江静华,马爱斌,杨东辉.硅丙乳液在鳞片状无机富锌涂料中的应用[J].腐蚀科学与防护技术,2010,22(2):142-145. |
| |
作者姓名: | 张留艳 江静华 马爱斌 杨东辉 |
| |
作者单位: | 1河海大学 水资源高效利用与工程安全国家工程研究中心;南京 210098; 2河海大学 材料科学与工程学院;南京 210098 |
| |
基金项目: | 国家“十一五”科技支撑计划重大项目(2006BAA01A24-3) |
| |
摘 要: | 利用硅丙乳液改性后基料与鳞片状锌粉均匀混合,制备硅酸锌系列水性无机富锌防腐涂料;并研究了涂料及其涂层的性能.结果表明,涂料中加入20 mass%的硅丙乳液改性后,基料对鳞片状锌粉有更好的润湿分散性,所得涂层的黏结力、耐水性、耐酸性、耐高温性、阴极保护作用均明显提高,改性涂层的耐蚀性良好,有应用价值.
|
关 键 词: | 硅丙乳液 无机富锌涂料 改性涂层 鳞片状锌粉 |
收稿时间: | 2008-09-22 |
修稿时间: | 2008-12-22 |
Inorganic Flake Zinc-rich Coating Modified by Silicate-acrylate Copolymerization Emulsion |
| |
Affiliation: | 1National Engineering Research Center of Water Resources Efficient Utilization and Engineering Safety;Hohai University;Nanjing 210098; 2School of Materials Science and Engineering;Hohai University;Nanjing 210098 |
| |
Abstract: | The effect of silicate-acrylate copolymerization emulsion on inorganic zinc-rich coating was studied through modification of the bonding agent for the coating with silicate-acrylate copolymerization emulsion.The results show that the bonding agent modified with 20 mass% of silicate-acrylate copolymerization emulsion shows the better wetting ability with the zinc flake.Therewith,the properties of the modified coating such as the adhesive strength, water-proof,corrosion-resistance,heat-resistance etc.were obviously enhanced.Therefore,the coating has very good application prospect. |
| |
Keywords: | silicate-acrylate copolymerization emulsion inorganic zinc-rich coating modified coating flake zinc |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《腐蚀科学与防护技术》浏览原始摘要信息 |
|
点击此处可从《腐蚀科学与防护技术》下载全文 |