| 微弧氧化技术在纺织工业中的应用 |
| |
| 引用本文： | 来永春,陈如意,邓志威,宋红卫,薛文彬,张龙海,胡治刚,赵娟.微弧氧化技术在纺织工业中的应用[J].腐蚀科学与防护技术,1998,10(1):51-54. |
| |
| 作者姓名： | 来永春 陈如意 邓志威 宋红卫 薛文彬 张龙海 胡治刚 赵娟 |
| |
| 作者单位： | [1]北京师范大学低能核物理研究所 [2]经纬纺织机械股份有限公司 |
| |
| 摘 要： | 用微弧氧化技术处理纺织机械中高速旋转的零部件和易损件.氧化层厚度可以控制在几十～200μm,显微硬度可达HV0.1800以上.对于某些零部件的沟区、内表面及溶液不易流动的区域,氧化层质量也较高.
|
| 关 键 词： | 微弧氧化 纺织工业 应用 |
| 收稿时间： | 1998-01-25 |
| 修稿时间： | 1998-01-25 |
APPLICATION OF MICROARC OXIDATION IN TEXTILE INDUSTRY |
| |
| LAI Yongchun,CHEN Ruyi,DENG Zhiwei,SONG Hongwei,XUE Wenbin.APPLICATION OF MICROARC OXIDATION IN TEXTILE INDUSTRY[J].Corrosion Science and Protection Technology,1998,10(1):51-54. |
| |
| Authors: | LAI Yongchun CHEN Ruyi DENG Zhiwei SONG Hongwei XUE Wenbin |
| |
| Abstract: | The wear resisting ceramic layer was prepared by microarc oxidation on the surface of high speed rotating components of textile machines. This ceramic layer has a compact structure and controllable thickness, and exhibits a fine adhesion, as well as good wear resistance. Therefore spinning properties and the service life of components can be improved greatly. |
| |
| Keywords: | microarc oxidation textile in dustry application |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《腐蚀科学与防护技术》浏览原始摘要信息 |
|
点击此处可从《腐蚀科学与防护技术》下载全文 |
|
