首页 | 本学科首页   官方微博 | 高级检索  
     

镁合金表面制备高红外发射率和高导电率热控膜层
引用本文:郭嘉成,徐文彬,章志铖,聂乐文,弓磊超,董杰,郭兴伍,丁文江.镁合金表面制备高红外发射率和高导电率热控膜层[J].表面技术,2017,46(3):47-52.
作者姓名:郭嘉成  徐文彬  章志铖  聂乐文  弓磊超  董杰  郭兴伍  丁文江
作者单位:上海交通大学轻合金精密成型国家工程研究中心,上海,200240;上海交通大学轻合金精密成型国家工程研究中心,上海,200240;上海交通大学轻合金精密成型国家工程研究中心,上海,200240;上海交通大学轻合金精密成型国家工程研究中心,上海,200240;上海交通大学轻合金精密成型国家工程研究中心,上海,200240;上海交通大学轻合金精密成型国家工程研究中心,上海,200240;上海交通大学轻合金精密成型国家工程研究中心,上海,200240;上海交通大学轻合金精密成型国家工程研究中心,上海,200240
基金项目:国家自然科学基金项目(51371116);航天先进技术联合研究中心技术创新(USCAST2013-23);江苏省科技成果转化项目(BA2016039)
摘    要:目的通过电沉积方法在镁锂合金表面制备具有高红外发射率以及高导电率的镀层,满足其在太空中散热以及电磁屏蔽的需要。方法通过前处理工艺(碱洗→酸洗→预钝化→化学镀镍磷→电镀铜)提高镁锂合金基体的耐蚀性能以及与后续镀层的结合力,并在此镁锂合金前处理工艺的条件下,电沉积多孔Zn-Ni合金镀层。通过热循环测试和电化学方法评价各镀层的电化学腐蚀行为和各镀层之间的结合力。结果各镀层之间的结合力良好,化学镀Ni-P层、电镀Cu层和多孔Zn-Ni层的耐蚀性能均优于镁锂合金基体,该组合镀层的协同作用可以有效地保护镁锂合金基体,提高其耐蚀性。结论最外层多孔Zn-Ni合金镀层主要由Ni2Zn11、NiO、NiS组成,其红外发射率为0.90,电阻率小于0.01 m?/cm。这表明多孔结构可以有效提高金属合金镀层的红外发射率,并保持合金镀层的高导电性。

关 键 词:镁锂合金  多孔Zn-Ni层  耐蚀性  红外发射率  导电率
收稿时间:2016/11/27 0:00:00
修稿时间:2017/3/20 0:00:00

Preparation of High Infrared Emissivity and Electrical Conductivity Coating on Magnesium Alloy
GUO Jia-cheng,XU Wen-bin,ZHANG Zhi-cheng,NIE Le-wen,GONG Lei-chao,DONG Jie,GUO Xing-wu and DING Wen-jiang.Preparation of High Infrared Emissivity and Electrical Conductivity Coating on Magnesium Alloy[J].Surface Technology,2017,46(3):47-52.
Authors:GUO Jia-cheng  XU Wen-bin  ZHANG Zhi-cheng  NIE Le-wen  GONG Lei-chao  DONG Jie  GUO Xing-wu and DING Wen-jiang
Affiliation:National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China,National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China,National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China,National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China,National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China,National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China,National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China and National Engineering Research Centre of Light Alloy Net Forming (NERC-LAF), Shanghai Jiao Tong University, Shanghai 200240, China
Abstract:The work aims to prepare a coating of both high electrical conductivity and infrared emissivity on Mg-Li magnesium alloy by hydrogen evolution method in order to meet the needs of thermal control and electromagnetic shielding in space.Corrosion resistance of the substrate was improved by a series of pretreatment processes (alkali cleaning→acid pickling→pre-passivation→electroless plating Ni-P →plating Cu),and adhesion to the following coatings was improved by plating the Cu interlayer.Porous Zn-Ni alloy coating was electrodeposited based on this pretreatment process of Mg-Li alloy.The corrosion behavior of all coatings and adhesion among them were evaluated by virtue of thermal cycle test and electrochemical method.As a result,adhesion of all the coatings completely met the technical standard applicable to satellites in space.The corrosion resistance of Ni-P coating,Cu coating and porous Zn-Ni coating was superior to that of Mg-Li alloy.The synergistic effect of these multi-layer coatings could protect the Mg-Li substrate and increase its corrosion resistance significantly.The outmost layer of porous Zn-Ni coating was composed of Ni2Zn11,NiO and NiS which shows high infrared emissivity of 0.90 and electrical resistance of <0.01 mΩ,/cm.It can be found that the porous structure can considerably increase the infrared emissivity while maintaining high electrical conductivity of metal alloy coatings.
Keywords:Mg-Li alloy  porous Zn-Ni coating  corrosion resistance  infrared emissivity  electrical conductivity
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《表面技术》浏览原始摘要信息
点击此处可从《表面技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号