首页 | 本学科首页   官方微博 | 高级检索  
     

碳纤维含量对导电涂层雷达波反射特性的影响研究
引用本文:牛飞龙,王琪,李惠子,张天才,王永凤.碳纤维含量对导电涂层雷达波反射特性的影响研究[J].表面技术,2017,46(8):184-187.
作者姓名:牛飞龙  王琪  李惠子  张天才  王永凤
作者单位:西南技术工程研究所,重庆,400039;西南技术工程研究所,重庆,400039;西南技术工程研究所,重庆,400039;西南技术工程研究所,重庆,400039;西南技术工程研究所,重庆,400039
基金项目:装备预研基金(6140239010103,9140A10031715BQ19140)
摘    要:目的获得不同碳纤维含量导电涂层对雷达波反射特性的影响规律,实现假目标雷达波反射特性控制。方法选择碳纤维粉为导电功能填料,丙烯酸聚氨酯树脂为粘结剂,制得碳纤维质量分数为0%~20%的导电涂料。研究碳纤维含量对涂层试板雷达波反射特性、涂层表面电阻率的影响,并在聚氨酯泡沫圆锥体构件模型上进行了试验验证。结果碳纤维质量分数从0%增加4%时,涂层表面电阻率从2.40×10~(11)?迅速降低至1.80×10~3?,雷达散射截面积(RCS)从-3.07 dBsm急剧增大至10.54 dBsm;增大到10%时,涂层表面电阻率呈波动缓慢下降的趋势,RCS缓慢增大至11.05 dBsm;继续增至20%时,涂层表面电阻率和RCS均变化很小。构件模型雷达波反射特性测试表明,碳纤维质量分数达10%时,聚氨酯泡沫圆锥体模型的表面电阻率为6.29×10~2?,0°~360°RCS达-7.12 dBsm,与贴铝膜诱饵的RCS(-6.48 dBsm)接近。结论碳纤维含量对涂层表面电阻率和雷达波反射特性的影响显著,在4%~10%为宜,在此范围内,涂层表面电阻率明显降低,呈现明显的金属化特征,雷达波反射特性与金属材料接近。

关 键 词:假目标  导电涂层  表面电阻率  雷达波反射特性
收稿时间:2017/1/20 0:00:00
修稿时间:2017/8/20 0:00:00

Radar Reflections Infuence Study of Different Carbon Fiber Content for Conductive Coating
NIU Fei-long,WANG Qi,LI Hui-zi,ZHANG Tian-cai and WANG Yong-feng.Radar Reflections Infuence Study of Different Carbon Fiber Content for Conductive Coating[J].Surface Technology,2017,46(8):184-187.
Authors:NIU Fei-long  WANG Qi  LI Hui-zi  ZHANG Tian-cai and WANG Yong-feng
Affiliation:Southwest Technology and Engineering Research Institute, Chongqing 400039, China,Southwest Technology and Engineering Research Institute, Chongqing 400039, China,Southwest Technology and Engineering Research Institute, Chongqing 400039, China,Southwest Technology and Engineering Research Institute, Chongqing 400039, China and Southwest Technology and Engineering Research Institute, Chongqing 400039, China
Abstract:The work aims to achieve the radar reflection influence regularity of different carbon fiber content coating,and realize controlling of radar reflections properties on fake target.A series of conductive coatings with different carbon fiber mass percent for 0%~20% have been prepared by using carbon fiber powder as conductive filler and acrylic polyurethane as binder.The effect of different carbon fiber content coating for coating surface resistivity and radar reflections property of test piece has been studied,and tested on the PU foam conical modeling.The coating surface resistivity reduced quickly from 2.40 × 1011 Ω to 1.80 × 103 Ω,and the RCS increased from-3.07 dBsm to 10.54 dBsm when the carbon fiber mass percent increased from 0% to 4%;the coating surface resistivity has reduced slowly when the carbon fiber mass percent increased to 10%,and the RCS increased to 11.05 dBsm;the coating surface resistivity and RCS showed little change when the carbon fiber mass percent increased continue to 20%.The radar reflections testing results of structure modeling showed that bait RCS was closing between it coated by conductive coating and pasted by aluminum film when the carbon fiber mass percent was 10%.The coating surface resistivity and RCS was effected by the content of carbon fiber,and the best range of carbon fiber mass percent in coating was 4%~10%.In this range,the surface resistivity of coating reduced obviously,the coating showed metallic character,and the radar reflection property was closed to metal.
Keywords:fake target  conductive coating  surface resistivity  radar reflection property
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《表面技术》浏览原始摘要信息
点击此处可从《表面技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号