首页 | 本学科首页   官方微博 | 高级检索  
     

几种氨基酸类缓蚀剂在铁表面吸附的 第一性原理研究
引用本文:郭雷,沈珣,KAYA Savas,石维,朱艳丽.几种氨基酸类缓蚀剂在铁表面吸附的 第一性原理研究[J].表面技术,2017,46(4):228-234.
作者姓名:郭雷  沈珣  KAYA Savas  石维  朱艳丽
作者单位:铜仁学院 材料与化学工程学院,贵州 铜仁,554300;土耳其共和国大学 理学院化学系,土耳其 锡瓦斯 58140;材料腐蚀与防护四川省重点实验室,四川 自贡,643000
基金项目:国家自然科学基金(51462030);贵州省科学技术基金(QKHJC2016-1149);铜仁学院博士科研启动基金(trxyDH1510);贵州省普通高等学校科技拔尖人才支持计划(QJHKYZ2016-105);材料腐蚀与防护四川省重点实验室开放基金(2016CL06);国家级大学生创新创业训练计划(2016106665)
摘    要:目的 氨基酸是一类重要的环境友好型金属有机缓蚀剂,研究缓蚀剂分子在金属表面的吸附行为,对深入理解缓蚀机理及设计新型缓蚀剂分子有重要的理论意义.方法 基于第一性原理框架下的原子轨道线性组合方法,采用Dmol3软件研究了甘氨酸、丙氨酸和亮氨酸三种分子在铁表面的吸附行为.首先对铁晶体表面的形貌学参数进行了计算,然后选取合适的晶面作为吸附表面.最后通过计算三种分子在铁表面的吸附能和分波态密度等参数分析缓蚀机制.结果 铁的三种常见晶面中,Fe(110)面为最佳吸附表面.三种氨基酸分子在Fe(110)表面呈竖直型吸附构型,甘氨酸、丙氨酸和亮氨酸的吸附能绝对值大小分别为2.233、2.254、2.472 eV,这与其实验缓蚀效率大小顺序相一致.结论 缓蚀剂分子吸附可导致金属基底的功函数减小.Hirshfeld电荷分析表明,吸附过程中存在从氨基酸分子到Fe(110)表面的电子转移现象.态密度分析表明,氨基酸分子中的活性原子与铁表面原子形成了共价键,键能的大小对缓蚀剂分子的缓蚀效率起决定性作用.

关 键 词:碳钢  缓蚀剂  氨基酸  吸附  第一性原理  Dmol3
收稿时间:2016/12/29 0:00:00
修稿时间:2017/4/20 0:00:00

Adsorption of Amino Acid Inhibitors on Iron Surface: A First-principles Investigation
GUO Lei,SHEN Xun,KAYA Savas,SHI Wei and ZHU Yan-li.Adsorption of Amino Acid Inhibitors on Iron Surface: A First-principles Investigation[J].Surface Technology,2017,46(4):228-234.
Authors:GUO Lei  SHEN Xun  KAYA Savas  SHI Wei and ZHU Yan-li
Affiliation:School of Material and Chemical Engineering, Tongren University, Tongren 554300, China,School of Material and Chemical Engineering, Tongren University, Tongren 554300, China,Cumhuriyet University, Faculty of Science, Department of Chemistry, Sivas 58140, Turkey,School of Material and Chemical Engineering, Tongren University, Tongren 554300, China and Sichuan Provincial Key Laboratory of Material Corrosion and Protection, Zigong 643000, China
Abstract:Amino acids are environment friendly organic inhibitors for most metals. The study on adsorption behavior of inhibitor molecules on metal surfaces has profound theoretical significance in understanding the anticorrosive mechanism and designing novel corrosion inhibitors. Based on first principles approach, the adsorption behaviour of three amino acid molecules (i.e., glycine, alanine, and leucine) on iron surface was studied in linear combination of atomic orbitals method with the Dmol3 package. Firstly, the morphology parameters of iron crystal surface were calculated, and then a suitable crystal face was chosen as the adsorption surface. Finally, some parameters including adsorption energy and projected density of states were calculated to explain the inhibition mechanism. The Fe(110) surface was an optimal simulation surface among the three common faces. Three molecules exhibited vertical adsorption structure on Fe(110) surface. The absolute values of adsorption energy were 2.233 eV, 2.254 eV, and 2.472 eV for glycine, alanine and leucine, respectively. The results were consistent with rank of experimental inhibition efficiency. The adsorption can reduce work function value of Fe(110) substrate. The Hirshfeld charge analysis shows that there is an electronic transfer process from the inhibitors to Fe substrate in all chemisorbed configurations. The analysis of state density suggests that several covalent bonds are formed between active atoms and Fe surface atoms in amino acid molecules. Bond energy plays a decisive role in the inhibitive efficiency of corresponding inhibitors.
Keywords:carbon steel  corrosion inhibitor  amino acid  adsorption  first-principles  Dmol3
本文献已被 万方数据 等数据库收录!
点击此处可从《表面技术》浏览原始摘要信息
点击此处可从《表面技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号