首页 | 本学科首页   官方微博 | 高级检索  
     

铜镍合金BFe30-1-1在NaCl溶液中的腐蚀行为
引用本文:陈海燕,朱有兰,舒畅.铜镍合金BFe30-1-1在NaCl溶液中的腐蚀行为[J].表面技术,2005,34(6):14-16.
作者姓名:陈海燕  朱有兰  舒畅
作者单位:广东工业大学材料与能源学院,广东,广州,510643
摘    要:对铜镍合金BFe30-1-1在NaCl溶液中的腐蚀行为进行了研究.测其在不同pH值的0.5mol/L NaCl溶液中的阳极极化曲线,并选择在一定电化学条件下进行恒电位腐蚀.通过对腐蚀后溶液中的Cu2 和Ni2 含量的分析和对试样断面的微区成分分析,从而了解不同条件下的铜镍合金的选择性腐蚀规律.实验结果表明:铜镍合金BFe30-1-1的选择性腐蚀类型取决于腐蚀介质的酸碱度及腐蚀电位等电化学条件.

关 键 词:铜镍合金  选择性腐蚀  点腐蚀  铜镍合金  NaCl  Solution  溶液  腐蚀行为  Alloy  Selective  Corrosion  腐蚀电位  酸碱度  腐蚀介质  腐蚀类型  结果  实验  腐蚀规律  选择性  成分分析  微区  断面  试样  含量  恒电位
文章编号:1001-3660(2005)06-0014-03
收稿时间:2005-05-28
修稿时间:2005-05-28

Research on the Selective Corrosion of BFe30-1-1 Alloy in NaCl Solution
CHEN Hai-yan,ZHU You-lan,SHU Chang.Research on the Selective Corrosion of BFe30-1-1 Alloy in NaCl Solution[J].Surface Technology,2005,34(6):14-16.
Authors:CHEN Hai-yan  ZHU You-lan  SHU Chang
Affiliation:Guangdong University of Technology, Guangdong 510643, China
Abstract:Corrosion behavior of BFe30-11 alloy in NaCl solutions is researched.The anode polarization curves of the alloy in the NaCl solutions at various pH values were measured.The corrosion behavior of the alloy at the various potential conditions was studied by means of measuring the concentrations of Cu~(2+) and Ni~(2+) in the corroding solution and characterizing its corrosion layers.The experimental results show that the selective corrosion of the BFe30-1-1 alloy is determined by the pH value and potential in the 0.5M NaCl solution.
Keywords:Cu-Ni alloy  Selective corrosion  Pitting corrosion
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号