| 渗流法制备泡沫铝合金工艺的研究 |
| |
| 引用本文： | 程和法,黄笑梅,陈国宏.渗流法制备泡沫铝合金工艺的研究[J].轻合金加工技术,2001,29(1):38-39,42. |
| |
| 作者姓名： | 程和法 黄笑梅 陈国宏 |
| |
| 作者单位： | 合肥工业大学, |
| |
| 基金项目： | 中国科学院固体物理研究所内耗开放实验室资助项目!（B96003－3） |
| |
| 摘 要： | 探讨了各种因素对加压渗流法制备泡沫铝合金的渗流工艺的影响规律。结果表明：粒子预热温度以渗流工艺的影响最显著。适当提高外加压力和浇注温度有助于渗流过程的进行，但过高的浇注温度和压力对渗流过程都是不利的。
|
| 关 键 词： | 渗流铸造 泡沫铝 压力 浇注温度 |
| 文章编号： | 1007-7235(2001)01-0038-02 |
Study on Technology of Making Foam Aluminium Alloy by Pressure Die |
| |
| CHENG He-fa,HUANG Xiao-mei,CHEN Guo-hong.Study on Technology of Making Foam Aluminium Alloy by Pressure Die[J].Light Alloy Fabrication Technology,2001,29(1):38-39,42. |
| |
| Authors: | CHENG He-fa HUANG Xiao-mei CHEN Guo-hong |
| |
| Abstract: | The effects of serveral technical factors on the process of penetrating casting of foam Al -alloys were studied. The preheating temperature of granules had the most prominent effect on the process of penetrating casting. The penetrating casting can be promoted by properly increasing the pressure applied and pouring temperature, but disturbed if pouring temperature and the pressure applied were too high. |
| |
| Keywords: | penetrating casting foam Al-alloys pressure temperature |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
