首页 | 本学科首页   官方微博 | 高级检索  
     

Fe—20Cr—4Al—Y合金的力学性能与含钇相的关系
引用本文:李碚,吴双霞,孟广恩,江丽萍,庞文杰. Fe—20Cr—4Al—Y合金的力学性能与含钇相的关系[J]. 金属学报, 1990, 26(5): 16-21
作者姓名:李碚  吴双霞  孟广恩  江丽萍  庞文杰
作者单位:包头稀土研究院(李碚,吴双霞,孟广恩,江丽萍),包头稀土研究院(庞文杰)
摘    要:研究了钇含量对Fe-20Cr-4Al-(0—0.73wt-%)钇合金室温力学性质的影响。结果表明,随钇含量增高,拉伸试样的均匀变形能力略微降低,断裂强度和预缩后的变形量显著下降。这些变化与合金中脆性含钇相对变形和断裂过程的影响有关。控制冶金工艺能改变含钇相的形态。

关 键 词:Fe-Cr-Al合金 力学性能 含钇 相
收稿时间:1990-05-18
修稿时间:1990-05-18

EFFECT OF Y ON MECHANICAL PROPERTIES OF Fe-20Cr-4Al-Y ALLOY
LI Bei,WU Shuangxia,MENG Guang''''en,JIANG Liping,PANG Wenjie Baotou Research Institute of Rare Earth. EFFECT OF Y ON MECHANICAL PROPERTIES OF Fe-20Cr-4Al-Y ALLOY[J]. Acta Metallurgica Sinica, 1990, 26(5): 16-21
Authors:LI Bei  WU Shuangxia  MENG Guang''''en  JIANG Liping  PANG Wenjie Baotou Research Institute of Rare Earth
Affiliation:LI Bei;WU Shuangxia;MENG Guang'en;JIANG Liping;PANG Wenjie Baotou Research Institute of Rare Earth
Abstract:With the increase of Y content in the Fe-20Cr-4Al-Y alloy, the uni-form deformability of tensile specimens was found to be slightly decreased, as wellas, the fracture strength and reduction of area after necking remarkably dropped.This seems to be dependent upon the brittle phase containing Y. The behaviour ofY-containing phase may be improved by adjusting the metallurgical technologicalprocess.
Keywords:Fe-Cr-Al alloy  mechanical property  yttrium
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号