| 快凝速度对淬态Fe—6.5%Si薄带织构的影响 |
| |
| 引用本文： | 胡广勇,左良.快凝速度对淬态Fe—6.5%Si薄带织构的影响[J].金属功能材料,1998,5(5):207-209. |
| |
| 作者姓名： | 胡广勇 左良 |
| |
| 作者单位： | 东北大学材料与冶金学院 |
| |
| 摘 要： | 用快凝的方法以不同的冷凝速度制备了Ｆｅ－６．５％Ｓｉ薄带。研究了快凝速度对制备态薄带晶粒取向的影响，研究结果表明，凝速较慢时样品为（００１）面织构，随冷速的增高，织构减弱。
|
| 关 键 词： | Fe－6．5％Si薄带 织构 冷速 |
Influence of Quenching Velocities on Textures of As quenched Fe 6.5%Si Ribbons |
| |
| Hu Guangyong,Zuo Liang,Cheng Lizhi,Liang Zhide.Influence of Quenching Velocities on Textures of As quenched Fe 6.5%Si Ribbons[J].Metallic Functional Materials,1998,5(5):207-209. |
| |
| Authors: | Hu Guangyong Zuo Liang Cheng Lizhi Liang Zhide |
| |
| Abstract: | Fe 6.5%Si ribbons were prepared by quenching method with different cooling rates.The influence of the cooling rates on the textures of the ribbons was studied.The results showed that (001) fibre texture presented in the ribbon with low cooling rate,and the peak intensity of the fibre decreased with the cooling rate rising. |
| |
| Keywords: | Fe 6 5% Si ribbon texture cooling rate |
| 本文献已被 CNKI 维普 等数据库收录！ |
