| 钌基合金与铁镍钴合金的真空钎焊 |
| |
| 引用本文： | 马蕊侠,杜平.钌基合金与铁镍钴合金的真空钎焊[J].焊接,1998(11):39-41. |
| |
| 作者姓名： | 马蕊侠 杜平 |
| |
| 作者单位： | 西北有色金属研究院，西北有色金属研究院，西北有色金属研究院，西北有色金属研究院 西安市 710016，西安市 710016，西安市 710016，西安市 710016 |
| |
| 摘 要： | 主要介绍了适用于钌基合金与铁镍钴合金的钎料，钎焊工艺和焊缝强度，分析了焊缝微观组织。结果表明：ＮｉＡｕＰｄＡｇＦｅＣｏ钎料适合钎焊钌基合金和铁镍钴合金，且焊缝组织致密，焊缝强度大于基材，获得的发动机电极通过地面打火２０万余次的点火考核及２００ｈ发动机试车，满足了设计使用要求。
|
| 关 键 词： | 钌基合金 铁镍钴合金 真空钎焊 钎缝组织 焊接 |
VACUUM BRAZING FOR Ru-BASE AND FeNiCo ALLOY |
| |
| Ma Ruixia et al..VACUUM BRAZING FOR Ru-BASE AND FeNiCo ALLOY[J].Welding & Joining,1998(11):39-41. |
| |
| Authors: | Ma Ruixia |
| |
| Affiliation: | Ma Ruixia et al. |
| |
| Abstract: | This paper introduces the filler metal, processes, strength and micro structure of brazed seam for Ru -base and FeNiCo alloy brazing. The results show that NiAuPdAgFeCo brazing filler metal is suited to braze both Ru -base and FeNiCo alloys,the micro structure of brazed seam is dense,and the strength of it is higher than that of base metal.The obtained engine electrode is tested by ignition for 200 thousand times and 200 hours testing run of engine and it meets requirements of design. |
| |
| Keywords: | Ru-base alloy FeNiCo alloy vacuum brazing micro structure of brazed seam |
| 本文献已被 CNKI 维普 等数据库收录！ |
