| 装载机后桥减速器齿轮轴崩齿失效分析 |
| |
| 引用本文： | 王延庆,崔春之,王温银,孙智. 装载机后桥减速器齿轮轴崩齿失效分析[J]. 金属热处理, 2008, 33(2): 107-109 |
| |
| 作者姓名： | 王延庆 崔春之 王温银 孙智 |
| |
| 作者单位： | 中国矿业大学,材料科学与工程学院,江苏,徐州,221008;中国矿业大学,材料科学与工程学院,江苏,徐州,221008;工程兵指挥学院,江苏,徐州,221004 |
| |
| 基金项目： | 中国矿业大学校科研和教改项目 |
| |
| 摘 要： | 对装载机后桥减速器齿轮轴伞齿段崩齿进行了断口分析及金相显微分析.结果表明,齿表面渗碳层深度不足,并有脱碳现象,渗碳层组织粗大,使用中存在偏载现象等问题,是造成齿轮轴伞齿段发生崩齿失效的主要原因.
|
| 关 键 词： | 齿轮轴 失效分析 渗碳层 脱碳 偏载 |
| 文章编号： | 0254-6051（2008）02-0107-03 |
| 收稿时间： | 2007-10-08 |
| 修稿时间： | 2007-10-08 |
Failure analysis of broken gear shaft bearing in a reducer of loading machine rear axle |
| |
| WANG Yan-qing,CUI Chun-zhi,WANG Wen-yin,SUN Zhi. Failure analysis of broken gear shaft bearing in a reducer of loading machine rear axle[J]. Heat Treatment of Metals, 2008, 33(2): 107-109 |
| |
| Authors: | WANG Yan-qing CUI Chun-zhi WANG Wen-yin SUN Zhi |
| |
| Abstract: | A gear shuft bearing in a reducer of loading machine rear axle was failed because of broken in the bevel tooth part during service. The failure reasons were analyzed by fracture observation and microstructure analysis. The results show that the insufficiency of carburized depth, decarburization on the surface layer and the coarse grain in carburized layer of the gear are the main factors to cause the failure of the gear, as well as the bias load running of the gear during service. |
| |
| Keywords: | gear shaft failure analysis carburized layer decarburization bias load |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
