首页 | 本学科首页   官方微博 | 高级检索  
     

喷射成形Cr12MoV钢显微组织研究
引用本文:徐寒冰,吴建生,章靖国.喷射成形Cr12MoV钢显微组织研究[J].金属热处理,2001(5):1-3.
作者姓名:徐寒冰  吴建生  章靖国
作者单位:1. 上海交通大学
2. 宝山钢铁股份公司技术中心新型材料研究所,
摘    要:应用喷射成形技术制备了Cr12MoV钢样,采用金相、X射线衍射、扫描电等分析方法对其微观组织进行了研究。将喷射成形材料与铸造方法制备的材料进行了对比,结果表明,喷射态合金更加致密,晶粒更为细小,碳化物的分布也更弥散。喷射成形技术大大降低了材料中合金元素的偏析程度。

关 键 词:喷射成形  密度  相组成  显微组织  Cr12MoV钢  冷作模具钢
文章编号:0254-6051(2001)05-0001-03
修稿时间:2000年11月12

Microstructure of Spray Formed Cr12MoV Steel
XU Han-bing,WU Jian-sheng,ZHANG Jing-guo.Microstructure of Spray Formed Cr12MoV Steel[J].Heat Treatment of Metals,2001(5):1-3.
Authors:XU Han-bing  WU Jian-sheng  ZHANG Jing-guo
Affiliation:XU Han bing 1,WU Jian sheng 1,ZHANG Jing guo 2
Abstract:Spray forming has been employed to produce Cr12MoV steel samples.The microstructure of the steel has been investigated by means of OM,XRD and SEM.The results show that the as sprayed alloy has a higher density,finer grains and more dispersed carbides compared with the as casted alloy.The spray forming process can minimize microsegration of the alloy elements in a large extent.
Keywords:spray  forming  density  phase  composition  microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号