首页 | 本学科首页   官方微博 | 高级检索  
     

含钪Al-Cu-Li合金的形变时效研究
引用本文:周昌荣,潘青林,王新宇,梁文杰,尹志民. 含钪Al-Cu-Li合金的形变时效研究[J]. 金属热处理, 2004, 29(10): 1-4
作者姓名:周昌荣  潘青林  王新宇  梁文杰  尹志民
作者单位:中南大学,材料科学与工程学院,湖南,长沙,410083
基金项目:国家“8 63”项目 ( 2 0 0 2AA3 0 5 10 4)
摘    要:通过显微组织观察和室温拉伸试验,研究了形变时效对含钪Al-Cu-Li合金组织和拉伸性能的影响。结果表明,时效前的预变形能促进T1(Al2CuLi)相弥散细小的析出,显著提高合金的强度,使时效峰值提前。合金的强度随预变形量的增大而升高,但预变形量过大,不利于T1相的析出形态和分布,影响合金的性能。在本试验条件下,该合金的最佳预变形量为3.5%。

关 键 词:形变时效 Al-Cu-Li合金 显微组织 含钪铝合金
文章编号:0254-6051(2004)10-0001-04
修稿时间:2004-04-10

Study of Deformation-Aging of Al-Cu-Li Alloy Containing Sc
ZHOU Chang-rong,PAN Qing-lin,WANG Xin-yu,LIANG Wen-jie,YIN Zhi-min. Study of Deformation-Aging of Al-Cu-Li Alloy Containing Sc[J]. Heat Treatment of Metals, 2004, 29(10): 1-4
Authors:ZHOU Chang-rong  PAN Qing-lin  WANG Xin-yu  LIANG Wen-jie  YIN Zhi-min
Abstract:Effects of deformation-aging on the microstructures and mechanical properties of Al-Cu -Li alloy containing Sc were studied by observation of microstructures and tensile test at room temperature.The results show that pretension before aging can greatly improve tensile properties of the alloy,And can make aging peak occur early and T1(Al_2CuLi) precipitation distribute more dispersively and homegenously.The strength of the alloy improves with the increasing of pretension,but over pretension leads to coarsening T1 phase and its distribution,which causes the strength of the alloy decreasing.The favorable pretension is about 3.5% under the experiment conditions.
Keywords:deformation-aging  Al-Cu-Li alloy  microstructure  aluminum alloy containing scandium
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号