|
|||||
|
|
| PVD氮化钛涂层刀具切削性能的试验研究 | |
| 引用本文： | 张少锋,黄拿灿,吴乃优,成晓玲,张中弦.PVD氮化钛涂层刀具切削性能的试验研究[J].金属热处理,2006,31(7):50-52. |
| 作者姓名： | 张少锋 黄拿灿 吴乃优 成晓玲 张中弦 |
| 作者单位： | 1. 广东工业大学,实验教学部,广东,广州,510090 2. 广东工业大学,材料与能源学院,广东,广州,510006 3. 广东工业大学,机电工程学院,广东,广州,510006 4. 广东世创金属科技有限公司,广东,顺德,528313 |
| 摘 要： | 采用电弧离子镀涂层工艺，制备了TiN涂层高速钢钻头和TiN涂层硬质合金铣刀，检测了TiN涂层的膜层性能，并进行了有TiN涂层和无涂层刀具的切削对比试验。结果表明，有TiN涂层的高速钢钻头使用寿命是无涂层钻头的5～7倍，有TiN涂层硬质合金铣刀的使用寿命是无涂层铣刀的3～11倍。 |
| 关 键 词： | 电弧离子镀 涂层刀具 涂层性能 切削试验 |
| 文章编号： | 0254-6051（2006）07-0050-03 |
| 收稿时间： | 2006-04-28 |
| 修稿时间： | 2006-04-28 |
Machinability Test of PVD-TiN Coated Cutting Tools |
|
| ZHANG Shao-feng,HUANG Na-can,WU Nai-you,CHENG Xiao-ling,ZHANG Zhong-xian.Machinability Test of PVD-TiN Coated Cutting Tools[J].Heat Treatment of Metals,2006,31(7):50-52. | |
| Authors: | ZHANG Shao-feng HUANG Na-can WU Nai-you CHENG Xiao-ling ZHANG Zhong-xian |
| Affiliation: | 1. Departmant of Laboratory Teaching, Guangdong University of Technology, Guangzhou Guangdong 510090, China; 2. Faculty of Materials and Energy, Guangdong University of Teehnology,Guangzhou Guangdong 510006, China; 3. Faculty of Eleetromeehanieal Engineering, Guangdong University of Technology, Guangzhou Guangdong 510006, China ;4. Guangdong Strong Metal Technology Co., Ltd. , Shunde Guangdong 528313, China |
| Abstract: | TiN coated high speed steel drills and hard alloy milling cutters were prepared by using arc ion plating method. The mechanical properties of the TiN coating were examined, and machinability tests of the tools with and without TiN coating were carried out and compared. The results show that the durability of TiN coated highspeed steel drills is 5 to 7 times longer than that of uncoated drills. For hard alloy milling cutters, the durability of coated tools is 3 to 11 times longer than that of the uncoated ones. |
| Keywords: | arc ion plating coated cutting-tool property of coating machinability test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |