| 热变形工艺对含硫非调质钢流变应力及组织的影响 |
| |
| 引用本文： | 谢坚锋,吴晓东,罗锐,王联进.热变形工艺对含硫非调质钢流变应力及组织的影响[J].金属热处理,2020,45(7):17-22. |
| |
| 作者姓名： | 谢坚锋 吴晓东 罗锐 王联进 |
| |
| 作者单位： | 江苏大学 材料科学与工程学院, 江苏 镇江 212013 |
| |
| 摘 要： | 在变形温度950~1150 ℃和应变速率0.01~5 s-1下,通过Gleeble-3500热模拟试验机进行单道次压缩试验,研究了热变形工艺对含硫非调质钢F45MnVS流变应力及组织的影响。结果表明:随着应变速率的增大,热压缩过程中的峰值应力增加,随着温度的升高,峰值应力降低;动态再结晶平均晶粒尺寸随着应变速率、变形量的增加而减小,随着温度的提高而增大。
|
| 关 键 词： | 非调质钢 热变形 本构方程 动态再结晶 |
| 收稿时间： | 2020-01-16 |
Effect of hot deformation process on flow stress and microstructure of sulfur-containing non-quenched and tempered steel |
| |
| Xie Jianfeng,Wu Xiaodong,Luo Rui,Wang Lianjin.Effect of hot deformation process on flow stress and microstructure of sulfur-containing non-quenched and tempered steel[J].Heat Treatment of Metals,2020,45(7):17-22. |
| |
| Authors: | Xie Jianfeng Wu Xiaodong Luo Rui Wang Lianjin |
| |
| Affiliation: | School of Materials Science and Engineering, Jiangsu University, Zhenjiang Jiangsu 212013, China |
| |
| Abstract: | Single-pass compression tests of sulfur-containing non-quenched and tempered steel were done at 950-1150 ℃ with strain rate of 0.01-5 s-1by Gleeble-3500 thermal simulation machine. Effect of hot deformation process on the flow stress and microstructure was studied. The results show that the peak stress during hot compression increases with the increase of strain rate and decreases with the increase of temperature, the average grain size of dynamic recrystallization decreases with the increase of strain rate and deformation amount, and increases with the increase of temperature. |
| |
| Keywords: | non-quenched and tempered steel hot deformation constitutive equation dynamic recrystallization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载全文 |
|
