| 传动压接头连续冲模设计 |
| |
| 引用本文： | 赵喜广,孔啸.传动压接头连续冲模设计[J].模具技术,2002(6):21-23. |
| |
| 作者姓名： | 赵喜广 孔啸 |
| |
| 作者单位： | 上海模具技术研究所,上海,200030 |
| |
| 摘 要： | 分析了控制系统传动压接头的冲压工艺 ,介绍了成形该零件的多工位级进模结构及模具制造中应注意问题。对类似厚材料小半径卷圆零件的多工位级进模设计有一定的参考价值。
|
| 关 键 词： | 压接头 级进模 模具结构 |
| 文章编号： | 1001-4934(2002)06-0021-03 |
| 修稿时间： | 2002年7月19日 |
Progressive Mould Design of Driving Latch |
| |
| ZHAO Xi guang,KONG Xiao.Progressive Mould Design of Driving Latch[J].Die and Mould Technology,2002(6):21-23. |
| |
| Authors: | ZHAO Xi guang KONG Xiao |
| |
| Abstract: | The stamping technology of driving latch in controlling system was analyzed.The structure of progressive mould was introduced.The problems that need attention in manufacturing process were stated.There was some reference value to similar parts with big thickness and litter bending radius. |
| |
| Keywords: | latch progressive mould mould structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
