首页 | 本学科首页   官方微博 | 高级检索  
     

LF2铝合金搅拌摩擦焊接头的疲劳特性
引用本文:王训宏,王快社,徐可为,胡锴.LF2铝合金搅拌摩擦焊接头的疲劳特性[J].特种铸造及有色合金,2006,26(6):378-380.
作者姓名:王训宏  王快社  徐可为  胡锴
作者单位:1. 西安建筑科技大学
2. 西安建筑科技大学;西安交通大学
3. 西安交通大学
4. 西安航空发动机(集团)有限公司
基金项目:陕西省科技计划;陕西省教育厅资助项目;陕西省西安市科技攻关项目
摘    要:对LF2铝合金搅拌摩擦焊接头的疲劳特性进行了研究,建立了焊接头的S-N曲线。疲劳试验结果表明,搅拌摩擦焊接头表现出良好的疲劳性能,疲劳寿命N=10^6次的疲劳强度值约为59~65MPa。搅拌摩擦焊接头具有细小的等轴晶粒和狭窄的热影响区,阻碍了滑移带的形成和裂纹的扩展,从而提高了接头的疲劳性能。疲劳断口分析显示,随着驻留滑移带的扩展逐渐萌生裂纹,在交变应力作用下最终导致失效。

关 键 词:搅拌摩擦焊接  力学行为  疲劳性能  S-N曲线  疲劳断口
文章编号:1001-2249(2006)06-0378-03
收稿时间:2006-03-20
修稿时间:2006年3月20日

Fatigue Behavior of LF2 Aluminum Alloy Joint for Stirring Friction Welding
Wang Xunhong,Wang Kuaishe,Xu Kewei,Hu Kai.Fatigue Behavior of LF2 Aluminum Alloy Joint for Stirring Friction Welding[J].Special Casting & Nonferrous Alloys,2006,26(6):378-380.
Authors:Wang Xunhong  Wang Kuaishe  Xu Kewei  Hu Kai
Abstract:S-N curves of welding joint were established by investigating fatigue behavior of LF2 aluminum alloy joint for stirring friction welding. The experimental results show that fatigue strength of stirring friction welding joint is about 59~65 MPa at fatigue life N=10~6, showing excellent fatigue behavior. Fatigue behavior of the joint was improved due to fine equiaxed grain and narrow heat effect zone inhibiting formation of slide-zone and propagation of crack. Fatigue fracture analysis shows that failure occurs at the condition of alternative stress with crack formation resulting from propagation of stayed slide zone.
Keywords:Stirring Friction Welding  Mechanical Properties  Fatigue Behavior  S-N Curves  Fatigue Rupture
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号