| 半固态准共晶铝硅合金的设计与坯料制备 |
| |
| 引用本文： | 周岐,张广安,武晓峰.半固态准共晶铝硅合金的设计与坯料制备[J].特种铸造及有色合金,2010,30(1). |
| |
| 作者姓名： | 周岐 张广安 武晓峰 |
| |
| 作者单位： | 辽宁工业大学材料与化学工程学院 |
| |
| 基金项目： | 辽宁省教育厅重点实验室资助项目 |
| |
| 摘 要： | 根据汽车空调配件使用性能的要求和半固态加工的特点,设计了适于半固态加工的汽车空调配件用高强耐热Al-10.5Si-2.5Cu-1.0Mg-Mn合金。利用低过热度浇注技术制备出组织为非枝晶状的Al-10.5Si-2.5Cu-1.0Mg-Mn合金半固态坯料,其最佳浇注温度为583℃;在接近液相线的低温保持一定时间,熔体中形成大量的细小自由(游离)晶体,并保持高的存活率,是Al-10.5Si-2.5Cu-1.0Mg-Mn合金半固态非枝晶组织形成的主要原因。
|
| 关 键 词： | 汽车空调配件 准共晶铝硅合金 半固态 合金设计 坯料制备 |
Design of Semi-solid Quasi-eutectic Al-Si Alloy and Billets Preparation |
| |
| Zhou Qi,Zhang Guang'an,Wu Xiaofeng.Design of Semi-solid Quasi-eutectic Al-Si Alloy and Billets Preparation[J].Special Casting & Nonferrous Alloys,2010,30(1). |
| |
| Authors: | Zhou Qi Zhang Guang'an Wu Xiaofeng |
| |
| Affiliation: | Zhou Qi,Zhang Guang\'an,Wu Xiaofeng(School of Materials , Chemical Engineering,Liaoning University of Technology,Fuxin,China) |
| |
| Abstract: | Based on performance requirements of automobile air condition accessories and characteristics of semi-solid process, quasi-eutectic Al-Si alloy Al-10.5Si-2.5Cu-l.0Mg-Mn was developed. The semi-solid billets with non-dendrite structure was prepared at 583℃ by low-super-heating pouring technology. A-mounts of free fine nuclei with high survival rate are created in the melt with holding for some time at low temperature nearby liquidus, which is responsible for the formation of non-dendrite on the aluminum alloy semi-solid billets. |
| |
| Keywords: | Automobile Air Condition Accessories Quasi-eutectic Al-Si Alloy Semi-solid Alloy Design Billet Preparation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
