首页 | 本学科首页   官方微博 | 高级检索  
     

6061铝合金半固态坯料二次加热工艺及组织演变
引用本文:尚淑珍,路贵民,赵祖欣.6061铝合金半固态坯料二次加热工艺及组织演变[J].特种铸造及有色合金,2010,30(2).
作者姓名:尚淑珍  路贵民  赵祖欣
作者单位:1. 华东理工大学机械与动力工程学院
2. 华东理工大学资源与环境工程学院
基金项目:国家自然科学基金资助项目 
摘    要:针对近液相线半连续铸造技术制备的6061铝合金半固态坯料,在不同加热温度及保温时间下进行二次加热,采用光学显微镜及图像分析仪考察试样的微观形貌及尺寸特征,结合差热分析的方法研究加热过程中的液相形成、组织演变及晶粒长大过程。结果表明,二次加热温度及保温时间共同影响着微观组织演变过程,随着加热温度升高及保温时间延长,晶粒逐渐球化并长大。加热温度越高,组织演变速度越快;保温时间越长,晶粒球化并长大越明显。有效地控制二次加热温度及保温时间,能够获得均匀、圆整且相对细小的半固态组织。

关 键 词:半固态  6061铝合金  二次加热  组织演变  相变

Reheating Process and Microstructural Evolution of Semi-solid 6061 Aluminum Alloy
Shang Shuzhen,Lu Guimin,Zhao Zuxin.Reheating Process and Microstructural Evolution of Semi-solid 6061 Aluminum Alloy[J].Special Casting & Nonferrous Alloys,2010,30(2).
Authors:Shang Shuzhen  Lu Guimin  Zhao Zuxin
Affiliation:Shang Shuzhen1,Lu Guimin2,Zhao Zuxin1(1. School of Mechanical , Power Engineering,East China University of Science , Technology,Shanghai,China,2. School of Resource , Environmental Engineering,China)
Abstract:Microstructure and size of 6061 aluminum alloy semi-solid billets prepared by near-liquidus semi-continuous casting, which was reheated at different heating temperature and holding time, were observed by the Nikon E600POL optical microscope and image analyzer to investigate the formation of liquid phase, microstructure evolution and grain growth during reheating process combining with differential thermal analysis (DTA). The results reveal that microstructural evolution is controlled by reheating temperatur...
Keywords:Semi-solid  6061 Aluminum Alloy  Reheating  Microsctuctural Evolution  Phase Transformation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号