首页 | 本学科首页   官方微博 | 高级检索  
     

轿车的后转向节零件铸锻复合成形工艺研究
引用本文:陈萌,陈思悦,裴小虎,杨弋涛.轿车的后转向节零件铸锻复合成形工艺研究[J].特种铸造及有色合金,2012,32(6):518-521.
作者姓名:陈萌  陈思悦  裴小虎  杨弋涛
作者单位:上海大学材料科学与工程学院
摘    要:在某轿车后转向节零件试制过程中,采用了铝合金铸造锻造复合成形技术。在其工艺制定过程中,借助铸造模拟软件Adstefan和锻造模拟软件Deform,对工序中的铸造和锻造过程分别进行了计算机模拟优化。对试制的零件进行了力学性能测试和金相组织分析,结果表明铸锻复合成形工艺是一种制造轿车零件的实用而有效的工艺。

关 键 词:转向节  铸造  锻造  A356合金

Casting and Forging Compound Process for Producing Steering Knuckles of Car
Chen Meng , Chen Siyue , Pei Xiaohu , Yang Yitao.Casting and Forging Compound Process for Producing Steering Knuckles of Car[J].Special Casting & Nonferrous Alloys,2012,32(6):518-521.
Authors:Chen Meng  Chen Siyue  Pei Xiaohu  Yang Yitao
Affiliation:(School of Materials Science and Engineering,Shanghai University)
Abstract:The casting and forging compound process of Al alloy was developed for the trial-manufacture of rear steering knuckle(an automobile part).With the help of casting simulation software Adstefan and forging simulation software Deform,casting and forging processes were simulated and optimized,respectively,during designing process.In addition,mechanical properties and microstructure of the steering knuckle samples produced were investigated.The results show that the casting and forging compound process is a practical and effective method for making some automobile parts.
Keywords:Steering Knuckle  Casting  Forging  A356 Alloy
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号