| 喷射沉积Al-Si-Ni-Cu-Mg合金的显微组织和相组成 |
| |
| 引用本文： | 王锋,杨滨,崔华,段先进,张济山,熊柏青,张永安.喷射沉积Al-Si-Ni-Cu-Mg合金的显微组织和相组成[J].特种铸造及有色合金,2000(4):1-3. |
| |
| 作者姓名： | 王锋 杨滨 崔华 段先进 张济山 熊柏青 张永安 |
| |
| 作者单位： | 1. 北京科技大学
2. 北京有色金属研究总院 |
| |
| 基金项目： | 国家863计划资助项目! (715 0 0 9 0 0 32 ) |
| |
| 摘 要： | 利用喷射沉积技术制备了Ａ１Ｓｉ２０Ｎｉ４Ｃｕ３Ｍｇ合金，分析了合金沉积态、挤压态和Ｔ６热处理态的微观组织，结果表明，组织中存在三种含Ｎｉ的金属间化合物，在挤压和Ｔ６热处理时，它们能够有效地阻碍Ｓｉ原子的扩散，抑制初晶Ｓｉ的长大。此外，起常常强化作用的Ｃｕ与Ａｌ，Ｓｉ一起形成的金属间体例物，影响了合金在Ｔ６热处理时的沉淀强化作用。
|
| 关 键 词： | 喷射沉积 铝硅合金 显微组织 相组成 |
| 修稿时间： | 2000-01-10 |
Microstructure Characteristics and Phase Components of Al-Si-Ni-Cu-Mg Alloy by Spray Deposition |
| |
| Wang Feng,Yang Bin,Cui Hua,Duan Xianjin,Zhang Jishan,Xiong Baiqing,Zhang Yong'an.Microstructure Characteristics and Phase Components of Al-Si-Ni-Cu-Mg Alloy by Spray Deposition[J].Special Casting & Nonferrous Alloys,2000(4):1-3. |
| |
| Authors: | Wang Feng Yang Bin Cui Hua Duan Xianjin Zhang Jishan Xiong Baiqing Zhang Yong'an |
| |
| Abstract: | Al Si Ni Cu Mg alloy was fabricated by spray deposition technique. The microstructure of alloy in deposited, extruded and T6 heat treated states has been analyzed. The results showed that the existence of three nickel containing intermetallic compound in the microstructure can prevent effectively the diffusion of silicon atoms and restrain the growth of primary silicon particles under extruded and T6 heat treated conditions. Furthermore, the precipitation strengthening effect of Cu with T6 heat treatment was influenced by the formation of Cu containing Al Si intermetallic compound. |
| |
| Keywords: | Spray Deposition Microstructure Hot Extrusion Intermetallics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
