| 金属-气体共晶定向凝固制备藕状多孔金属的研究 |
| |
| 引用本文： | 刘源,李言祥,张华伟,万疆.金属-气体共晶定向凝固制备藕状多孔金属的研究[J].特种铸造及有色合金,2005,25(1):1-4. |
| |
| 作者姓名： | 刘源 李言祥 张华伟 万疆 |
| |
| 作者单位： | 清华大学
(刘源，李言祥，张华伟)，清华大学(万疆) |
| |
| 基金项目： | 国家自然科学基金，高等学校博士学科点专项科研项目，航天部航天创新项目 |
| |
| 摘 要： | 金属-气体共晶定向凝固(Gasar)是一种制备规则多孔金属的新工艺.利用自行开发的Gasar装置,成功制备了具有规则气孔分布的藕状多孔金属Mg,并研究了铸型预热温度和气体压力等工艺参数对气孔率、气孔大小和分布的影响.结果表明:提高铸型预热温度可以完全消除无气孔金属壳;随着氢气压力的增大,铸锭的平均直径都在减小;在整个Gasar凝固中约有8%左右的氢气溢出.
|
| 关 键 词： | 多孔金属 共晶 定向凝固 藕状结构 |
| 文章编号： | 1001-2249(2005)01-0001-04 |
| 修稿时间： | 2004年7月26日 |
Preparation of Lotus-type Porous Metal with Metal-gas Eutectic Directional Solidification |
| |
| Liu Yuan,Li Yanxiang,Zhang Huawei,Wan Jiang.Preparation of Lotus-type Porous Metal with Metal-gas Eutectic Directional Solidification[J].Special Casting & Nonferrous Alloys,2005,25(1):1-4. |
| |
| Authors: | Liu Yuan Li Yanxiang Zhang Huawei Wan Jiang |
| |
| Abstract: | Metal-gas eutectic directional solidification (Gasar) ia a novel technology for preparing lotus-type metals with oriented pores parallel to the solidification direction. We developed a Gasar apparatus to have successfully prepared lotus-type porous Mg samples. Effects of technological parameters, including preheating temperature of cast mold and gas pressure, on gas-hole rate, gas-hole size and gas-hole distribution in the lotus-type porous Mg were investigated. The results indicate that gas holes in metal shell can be eliminated by the increase of the preheating temperature of cast mold. Average diameters of the ingot decrease with hydrogen pressure increase.About 8% hydrogen is overflowed during the total Gasar solidification. |
| |
| Keywords: | Porous Metal Eutectic Directional Solidification Lotus-type Structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
