| 合金成分和热处理对高强高导铜合金性能的影响 |
| |
| 引用本文： | 曹志强,李本贵,于艳,方园,李廷举.合金成分和热处理对高强高导铜合金性能的影响[J].特种铸造及有色合金,2009,29(12). |
| |
| 作者姓名： | 曹志强 李本贵 于艳 方园 李廷举 |
| |
| 作者单位： | 1. 大连理工大学铸造工程研究中心
2. 宝钢技术中心 |
| |
| 摘 要： | 采用正交试验方法,研究了合金成分和热处理工艺对铜合金性能的影响.试验表明,Ni和Si元素的质量比对合金硬度和电导率的影响非常大.当二者质量比为5时,对合金电导率的影响较小,且强化效果较好.同时固溶、时效、冷锻也对性能有明显影响.试验所研制的高强高导铜合金兼有较好的力学性能和电学性能,硬度(HB)和电导率分别达到181和24.94 MS/m.
|
| 关 键 词： | 高硬度 高电导率 铜合金 正交试验方法 |
Effects of Composition and Heat Treatment on Properties of High-strength and High-conductivity Cu Alloy |
| |
| Cao Zhiqiang,Li Bengui,Yu Yan,Fang Yuan,Li Tingju.Effects of Composition and Heat Treatment on Properties of High-strength and High-conductivity Cu Alloy[J].Special Casting & Nonferrous Alloys,2009,29(12). |
| |
| Authors: | Cao Zhiqiang Li Bengui Yu Yan Fang Yuan Li Tingju |
| |
| Abstract: | Effects of composition and heat treatment on properties of Cu alloy were investigated by component orthogonal testing. The results show that hardness and electric conductivity of the Cu alloy are closely related to mass ratio of Ni to Si. With Ni/Si of 5, although electric conductivity of the Cu alloy is slightly changed, desirable strengthening effects on the Cu alloy can be observed. Meanwhile, the properties of the Cu alloy are also dependent on the solid solution treatment, aging treatment and cold forging. The high-strength and high conductivity Cu alloy with excellent mechanical properties and electric properties was successfully prepared, and the hardness and electric conductivity of the prepared Cu alloy reach HB181 and 14.94MS/m, respectively. |
| |
| Keywords: | High Hardness High Conductivity Copper Alloy Orthogonal Method |
| 本文献已被 万方数据 等数据库收录！ |
|
