| 发动机缸盖用铸造铝硅合金力学性能研究 |
| |
| 引用本文： | 刘福东,苏勇,秦春段.发动机缸盖用铸造铝硅合金力学性能研究[J].特种铸造及有色合金,2011,31(1). |
| |
| 作者姓名： | 刘福东 苏勇 秦春段 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院 |
| |
| 摘 要： | 通过改变Si的含量,对发动机缸盖用铸造铝硅合金力学性能进行了研究。结果表明,随着Si含量的提高,铸造Al-Si合金的常温、250℃高温抗拉强度先升高,再降低,在共晶点附近达到最大值,其中高温抗拉强度的提高幅度明显。而合金的硬度先是缓慢上升,过了共晶区域后则急剧上升。与国外的常用缸盖材料的力学性能进行对比后发现,所研究的发动机缸盖用铸造铝硅合金具有优良的综合力学性能。
|
| 关 键 词： | 铸造铝硅合金 力学性能 Si含量 硬度 |
Mechanical Properties of Cast Al-Si Alloy for Engine's Cylinder Head |
| |
| Liu Fudong,Su Yong,Qin Chunduan.Mechanical Properties of Cast Al-Si Alloy for Engine's Cylinder Head[J].Special Casting & Nonferrous Alloys,2011,31(1). |
| |
| Authors: | Liu Fudong Su Yong Qin Chunduan |
| |
| Affiliation: | Liu Fudong,Su Yong,Qin Chunduan(School of Materials Science and Engineering,Hefei University of Technology,Hefei,China) |
| |
| Abstract: | Effects of different Si contents on mechanical properties of cast Al-Si alloy for engine cylinder head were investigated.With increasing in Si content,ambient and elevated tensile strength of the alloy are firstly increased and then decreased,and maximum tensile strength value can be observed at eutectic point of the Al-Si alloy,especially improvement of elevated tensile strength.Hardness of the alloy is firstly ascended slowly and then raised dramatically at hypereutectic state.Compared with conventional A... |
| |
| Keywords: | Cast Al-Si Alloy Mechanical Properties Si Content Hardness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
