| 基于CAE分析的汽车齿轮室浇注系统的优化 |
| |
| 引用本文： | 胡志,闫洪,陈国香,钟子明,聂文卿,周国兴.基于CAE分析的汽车齿轮室浇注系统的优化[J].特种铸造及有色合金,2006,26(11):704-706. |
| |
| 作者姓名： | 胡志 闫洪 陈国香 钟子明 聂文卿 周国兴 |
| |
| 作者单位： | 1. 南昌大学
2. 江西江铃有色金属压铸厂 |
| |
| 基金项目： | 国家自然科学基金;教育部留学回国人员科研启动基金 |
| |
| 摘 要： | 利用铸造模拟软件对汽车齿轮室充型和凝固过程进行了数值模拟，预测了零件在铸造过程中可能出现缺陷的位置。以模拟结果为依据，对其浇注系统进行反复的修改和优化。在铸件最后凝固的地方大量增设溢流槽，满足铸型内气体的排放要求，同时增设多个内浇道，使得液态合金更加平稳向型腔内推进，以减少卷气对铸件质量的影响。模拟结果表明：改进后的方案中液态合金充型平稳，且零件的铸造缺陷明显减少，从而提高了铝合金压铸件的整体质量。
|
| 关 键 词： | 压铸 浇注系统 |
| 文章编号： | 1001-2249（2006）11-0704-03 |
| 收稿时间： | 2006-06-25 |
| 修稿时间： | 2006年6月25日 |
Optimization of Gating System for Gear Box of the Car Based on CAE System |
| |
| Hu Zhi,Yan Hong,Chen Guoxiang,Zhong Ziming,Nie Wenqing,Zhou Guoxing.Optimization of Gating System for Gear Box of the Car Based on CAE System[J].Special Casting & Nonferrous Alloys,2006,26(11):704-706. |
| |
| Authors: | Hu Zhi Yan Hong Chen Guoxiang Zhong Ziming Nie Wenqing Zhou Guoxing |
| |
| Abstract: | The possible defect locations encountered in the castings were predicted by simulating filling and solidification process of gear box of the car using a CAE system. Based on simulated results, the gating system for the filling has been optimized. The results show that when liquid alloy was poured smoothly, the casting defects in the casting during pouring process have been decreased obviously by means of modified gating system, which improves the whole quality of aluminum alloy die castings |
| |
| Keywords: | CAE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
