| GCr15盘条裂纹产生原因分析和研究 |
| |
| 引用本文： | 戈春刚,邝永海,王明元.GCr15盘条裂纹产生原因分析和研究[J].轧钢,2017,34(1):91-93. |
| |
| 作者姓名： | 戈春刚 邝永海 王明元 |
| |
| 作者单位： | 1.内蒙古包钢钢联股份有限公司长材厂，内蒙古包头014010 ; 2.钢铁研究总院华东分院，江苏淮安223001 |
| |
| 摘 要： | 针对包钢集团公司长材厂生产的GCr15盘条轧后存在裂纹的问题,采用扫描电镜、能谱分析、金相显微镜等仪器对裂纹进行了观察和分析。结果表明:夹杂物的存在是导致裂纹形成的主要原因,通过夹杂物的控制、铸坯均热模式的改进及提高表面质量,可减少或避免GCr15热轧盘条表面裂纹的产生。
|
| 关 键 词： | GCr15轴承钢 裂纹 分析 |
| 收稿时间： | 2016-01-07 |
Analysis and research on crack of GCr15 bearing steel wire rod |
| |
| GE Chun-gang,KUANG Yong-hai,WANG Ming-yuan.Analysis and research on crack of GCr15 bearing steel wire rod[J].Steel Rolling,2017,34(1):91-93. |
| |
| Authors: | GE Chun-gang KUANG Yong-hai WANG Ming-yuan |
| |
| Affiliation: | 1.Long Product Mill,Steel Union Co.,Ltd.,of Baotou SteelGroupCorp.,Baotou 014010,China ;2.Huadong Branch,CISRI,Huaian 223001,China |
| |
| Abstract: | In view of cracks occurring on the surface of hot rolled bearing steel wire rod in Baotou Iron and Steel Co.,Ltd.,the causes were analyzed in detail by using scanning electron microscopy (SEM),energy spectrum analysis and metallographic microscope.The result showed that the existence of inclusions was the main cause of crack formation.Through the inclusion control and improvement of billet soaking model and its surface quality,the crack defect was avoided. |
| |
| Keywords: | GCr15 bearing steel crack analysis |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
