| 冷轧高强HC250IF钢冲压分层原因分析及改进措施 |
| |
| 引用本文： | 王风强,王汝站,刘素丽,吕超杰,姜丽梅,张银普.冷轧高强HC250IF钢冲压分层原因分析及改进措施[J].轧钢,2021,38(6):95-99. |
| |
| 作者姓名： | 王风强 王汝站 刘素丽 吕超杰 姜丽梅 张银普 |
| |
| 作者单位： | 1.河钢集团邯钢公司技术中心,河北 邯郸 056015; 2.河北省汽车用先进钢铁材料重点实验室,河北 邯郸 056015; 3.柳州五菱汽车工业有限公司山东分公司,山东青岛 266555 |
| |
| 基金项目： | 科技部十三五重点产业化提升项目(2017YFB0304103) |
| |
| 摘 要： | 针对冷轧高强HC250IF带钢冲压分层问题,通过化学成分分析、显微组织观察及能谱分析等手段,明确了铸坯中心P偏析是导致成品带钢冲压分层的根本原因。为此,采取钢水过热度20~30 ℃稳定浇注、提高连铸二冷水冷却强度、投用电磁搅拌、凝固末端精准定位、增加动态轻压下量等措施,有效改善了铸坯中心P偏析,杜绝了冷轧高强HC250IF带钢冲压分层问题。
|
| 关 键 词： | 高强IF钢 冲压分层 P偏析 优化措施 |
| 收稿时间： | 2021-01-20 |
Cause analysis of stamping delamination of cold rolled high strength HC250IF steel strip and its countermeasures |
| |
| WANG Fengqiang,WANG Ruzhan,LIU Suli,LÜ,Chaojie,JIANG Limei,ZHANG Yinpu.Cause analysis of stamping delamination of cold rolled high strength HC250IF steel strip and its countermeasures[J].Steel Rolling,2021,38(6):95-99. |
| |
| Authors: | WANG Fengqiang WANG Ruzhan LIU Suli LÜ Chaojie JIANG Limei ZHANG Yinpu |
| |
| Affiliation: | 1. Technology Center,Handan Co.,HBIS Group,Handan 056015,China; 2. Hebei Key Laboratory of Advanced SteelMaterials for Auto,Handan 056015,China; 3. Shandong Branch,Liuzhou Wuling Automobile Industry Co., Ltd.,Qingdao 266555,China |
| |
| Abstract: | For the stamping delamination of cold rolled high strength OF HC250IF steel strip, it was clear that central P segregation of slab was the root cause of stamping delamination for final product by means of chemical composition analysis, microstructure observation and EDS. The optimization measures,such as using 20~30 ℃ superheat of molten steel and making sure stable pouring, increasing the cooling intensity of secondary cooling water, using electromagnetic stirring, accurate positioning of the end of solidification and increasing dynamic light reduction were adopted to effectively improve the central P segregation of slab, and the problem of stamping delamination of cold rolled high strength HC250IF steel strip was eliminated. |
| |
| Keywords: | high strength IF steel stamping delamination segregation of P optimization measures |
|
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
