| 薄规格高强钢轧制稳定性的提高 |
| |
| 引用本文： | 胡亮,王俊银,徐芳.薄规格高强钢轧制稳定性的提高[J].轧钢,2018,35(6):77-79. |
| |
| 作者姓名： | 胡亮 王俊银 徐芳 |
| |
| 作者单位： | 首钢京唐钢铁联合有限责任公司热轧部，河北唐山063200 |
| |
| 摘 要： | 薄规格带钢不仅可降低成本,同时也可替代部分冷轧产品。对某厂2 250mm热连轧机组薄规格高强钢生产影响因素进行了研究分析,结合生产实践,通过对加热制度、过程温降、中间坯镰刀弯及精轧轧制稳定性控制等方面进行优化,并提高设备精度,使薄规格高强热轧带钢的轧制稳定性大为提高。
|
| 关 键 词： | 关键词：薄规格 稳定性 镰刀弯 |
| 收稿时间： | 2017-11-16 |
Improvement of the rolling stability of thin gauge and high strength steel strip |
| |
| HU Liang,WANG Jun- yin,XU Fang.Improvement of the rolling stability of thin gauge and high strength steel strip[J].Steel Rolling,2018,35(6):77-79. |
| |
| Authors: | HU Liang WANG Jun- yin XU Fang |
| |
| Affiliation: | （Hot Rolling Dept.,Shougang Jingtang United Iron and Steel Co.,Ltd.,Tangshan 063200,China） |
| |
| Abstract: | Thin gauge steel sheet can not only reduce the cost,but also replace some part of cold roll products.The influence factor of production of thin gauge and high strength steel of 2 250 mm HSM were analyzed and researched,and some measures were proposed based on production practice.By optimizing heating regulation,rolling temperature decrease,transfer bar camber control and finishing mill stable rolling,and improving device accuracy,the rolling stability of thin gauge and high strength steel were improved a lot,and production capacity were ensured. |
| |
| Keywords: | Key words: thin gauge stability camber |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
