| 连续处理机组出口飞剪剪前自动减速计算 |
| |
| 引用本文： | 张春煜,白劳炼,王菊. 连续处理机组出口飞剪剪前自动减速计算[J]. 轧钢, 2014, 31(6): 34-36. DOI: 10.13228/j.boyuan.issn1003-9996.20130262 |
| |
| 作者姓名： | 张春煜 白劳炼 王菊 |
| |
| 作者单位： | 中冶陕压重工设备有限公司，陕西 西安 710119 |
| |
| 摘 要： | 介绍了连续处理机组出口飞剪在焊缝模式和带长模式下剪切焊缝废料、取样和分卷的剪前机组减速控制的设计计算，分析得出了可靠的数学模型，经国内多个连续退火机组和镀锌机组的应用表明，其控制精确达到了机组控制要求。
|
| 关 键 词： | 出口段 焊缝模式 带长模式 自动 减速 设计 设定减速带长 比较 |
| 收稿时间： | 2013-11-15 |
Automatic reduced speed calculation of exit section flying shear for the continuous processing line |
| |
| ZHANG Chun-yu,BAI Lao-lian,WANG Ju. Automatic reduced speed calculation of exit section flying shear for the continuous processing line[J]. Steel Rolling, 2014, 31(6): 34-36. DOI: 10.13228/j.boyuan.issn1003-9996.20130262 |
| |
| Authors: | ZHANG Chun-yu BAI Lao-lian WANG Ju |
| |
| Affiliation: | MCC-SFRE Heavy Industry Equipment Co., Ltd.,Xi’an 710119, China |
| |
| Abstract: | The calculation model and control method of continuous processing line speed reduction were analyzed at different case of cutting welding seam scraps,cutting samples,dividing the coil.The calculation model was obtained based on welding seam cutting mode and strip length cutting mode,its effect was demonstrated good. |
| |
| Keywords: | continuous processing line cut welding seam cutting mode strip length cutting mode mathematical model |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
