首页 | 本学科首页   官方微博 | 高级检索  
     

锂离子电池用聚合物电解质的制备与性能研究
引用本文:冯庆,冯生,潘春跃,巢猛,杨文波,刘珺,郑瑛.锂离子电池用聚合物电解质的制备与性能研究[J].稀有金属材料与工程,2008(Z4).
作者姓名:冯庆  冯生  潘春跃  巢猛  杨文波  刘珺  郑瑛
作者单位:西北有色金属研究院;中南大学;
摘    要:通过原位复合法制备了PEO/LiClO4/SiO2聚电解质膜,采用TEM、XRD、交流阻抗法和充放电测试等研究了粒子的分布状态、聚合物电解质膜的结晶行为及组装成电池的充放电行为。结果表明,原位生成的SiO2粒子分布均匀,抑制了聚合物电解质的结晶,以此膜为电解质组装的全固态聚合物锂电池首次充电电压平台在4.2V左右,放电中值电压为3.6V,初始充电比容量为130mAh·g-1,50次循环后放电容量保持在84mAh·g-1。

关 键 词:聚合物锂离子电池  原位复合  聚合物电解质  充放电  SiO2  

Preparation and Characterization of Polymer Electrolyte for Lithium-Ion Battery
Abstract:The PEO/LiClO4/SiO2 composite polymer electrolyte films were prepared by in-situ method. The particles morphology, the crystallization and electrochemical properties of the films were studied using TEM, electrical impedance spectroscopy and charge-discharge, respectively. The results show that the in-situ formed SiO2 particles uniformly disperse in PEO matrix and the SiO2 restrains the crystallization of polymer electrolyte. The polymer lithium ion battery with the electrolyte films exhibits stable discharg...
Keywords:polymer lithium ion battery  in situ composite  polymer electrolyte  charge-discharge  SiO2  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号