|
|||||
|
|
| 掺杂方式对Mo-La2O3合金组织和力学性能的影响 | |
| 引用本文： | 王林,孙军,孙院军,罗建海,王建武,赵宝华.掺杂方式对Mo-La2O3合金组织和力学性能的影响[J].稀有金属材料与工程,2007,36(10):1827-1830. |
| 作者姓名： | 王林 孙军 孙院军 罗建海 王建武 赵宝华 |
| 作者单位： | 1. 西安交通大学,陕西,西安,710049;金堆城钼业集团有限公司,陕西,西安,710068 2. 西安交通大学,陕西,西安,710049 3. 金堆城钼业集团有限公司,陕西,西安,710068 |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| 摘 要： | 分别采用液．固和液．液掺杂方式向钼粉中引入氧化镧，烧结出Mo-La2O3合金，通过扫描电镜和透射电镜观察，研究了不同掺杂方式制备的Mo-La2O3合金中第二相粒子的粒度分布和形貌，分析了第二相粒子在钼基体中的分布规律，检测了钼丝的拉伸性能，通过位错塞积理论讨论了La2O3颗粒形貌和分布对Mo-La2O3拉伸性能的影响机制。结果表明：液．液掺杂方法能够使钼基体中的La2O3粒子均匀分散，细化La2O3粒径；直径0．6mm、液．液掺杂钼丝的拉伸性能优于液-固掺杂钼丝。 |
| 关 键 词： | 掺杂方式 显微组织 力学性能 |
| 文章编号： | 1002-185X（2007）10-1827-04 |
| 修稿时间： | 2006-10-13 |
Effects of Doping Methods on Microstructure and Mechanical Properties of Mo-La2O3 |
|
| Wang Lin,Sun Jun,Sun Yuanjun,Luo Jianhai,Wang Jianwu,Zhao Baohua.Effects of Doping Methods on Microstructure and Mechanical Properties of Mo-La2O3[J].Rare Metal Materials and Engineering,2007,36(10):1827-1830. | |
| Authors: | Wang Lin Sun Jun Sun Yuanjun Luo Jianhai Wang Jianwu Zhao Baohua |
| Abstract: | Lanthanum oxide was introduced to molybdenum powder by liquid-liquid doping and liquid-solid doping, respectively. Mo-La2O3 alloys were prepared by powder metallurgy technology. The particle size distribution and feature of doped particles were investigated by SEM and TEM. The distribution of doped particles in matrix was analyzed, the tensile property of the molybdenum alloy wire was tested, the mechanism of the influence of La2O3 particle on tensile property of Mo-La2O3 alloys was discussed by dislocation pile-up theory. The results show that liquid-liquid doping method can refine La2O3 particles and makes them dispersed uniformly in matrix. The tensile property of the molybdenum alloy wire with 0.6 mm diameter liquid-liquid-doped is better than that liquid-solid-dopinged. |
| Keywords: | Mo-La2O3 |
| 本文献已被 维普 万方数据 等数据库收录！ | |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 | |
| 点击此处可从《稀有金属材料与工程》下载全文 | |