| 碘化多壁碳纳米管制备含有Ag/MWCNTs复合材料的银-环氧树脂浆料 |
| |
| 引用本文： | 刘城彬,甘国友,厉彦超,余向磊,程君华,唐蔺.碘化多壁碳纳米管制备含有Ag/MWCNTs复合材料的银-环氧树脂浆料[J].稀有金属材料与工程,2022,51(2):408-413. |
| |
| 作者姓名： | 刘城彬 甘国友 厉彦超 余向磊 程君华 唐蔺 |
| |
| 作者单位： | 昆明理工大学 材料科学与工程学院 云南省先进材料重点实验室，云南 昆明 650093,昆明理工大学 材料科学与工程学院 云南省先进材料重点实验室，云南 昆明 650093,昆明理工大学 材料科学与工程学院 云南省先进材料重点实验室，云南 昆明 650093,昆明理工大学 材料科学与工程学院 云南省先进材料重点实验室，云南 昆明 650093,昆明理工大学 材料科学与工程学院 云南省先进材料重点实验室，云南 昆明 650093,昆明理工大学 材料科学与工程学院 云南省先进材料重点实验室，云南 昆明 650093 |
| |
| 基金项目： | the National Science Foundation of China (Grant No. 5177011044) and Technology projects of Yunnan Province (Grant No. 202002AB080001-1). |
| |
| 摘 要： | 提出一种将多壁碳纳米管碘化后制备银/多壁碳纳米管（Ag/MWCNTs）复合材料的方法。通过球磨对碘化多壁碳纳米管进行了功能化，并通过透射电子显微镜（TEM）、X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、拉曼光谱和热重分析（TG）对其进行了表征。结果表明，经碘化处理后，银纳米粒子（Ag-NPs）能更好地粘附在碳纳米管表面，改善了银纳米粒子与碳纳米管之间的连接。羟基（-OH）基团的伸缩振动明显增强，激活了碳纳米管的表面，增加了碳纳米管表面Ag+形核的数量。在260 ℃以下，Ag/MWCNTs复合材料的质量损失小于MWCNTs的质量损失。最后，制备了银-环氧树脂浆料，发现使用Ag/MWCNTs复合物制备的浆料具有最低的电阻率和最高的热导率。
|
| 关 键 词： | MWCNTs 球磨 碘化 Ag/MWCNTs复合材料 银-环氧树脂浆料 |
| 收稿时间： | 2020/12/24 0:00:00 |
| 修稿时间： | 2021/2/6 0:00:00 |
Preparation of Silver-Epoxy Resin Paste with Ag/MWCNTs Composites Using Lodinated Multi-walled Carbon Nanotubes |
| |
| Liu Chengbin,Gan Guoyou,Li Yanchao,Yu Xianglei,Cheng Junhua and Tang Lin.Preparation of Silver-Epoxy Resin Paste with Ag/MWCNTs Composites Using Lodinated Multi-walled Carbon Nanotubes[J].Rare Metal Materials and Engineering,2022,51(2):408-413. |
| |
| Authors: | Liu Chengbin Gan Guoyou Li Yanchao Yu Xianglei Cheng Junhua and Tang Lin |
| |
| Affiliation: | Key Laboratory of Advanced Materials of Yunnan Province, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China,Key Laboratory of Advanced Materials of Yunnan Province, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China,Key Laboratory of Advanced Materials of Yunnan Province, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China,Key Laboratory of Advanced Materials of Yunnan Province, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China,Key Laboratory of Advanced Materials of Yunnan Province, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China,Key Laboratory of Advanced Materials of Yunnan Province, Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China |
| |
| Abstract: | A method was developed for preparing silver/multi-wall carbon nanotubes (Ag/MWCNTs) composites after iodination of the MWCNTs. The MWCNTs were functionalized by ball milling in the presence of iodine, and characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, and thermogravimetric analysis (TG). The results show that the silver-nanoparticles (Ag-NPs) adhere better to the surface of the MWCNTs after iodination, which can improve the connection between the Ag-NPs and the MWCNTs. The hydroxyl (-OH) group stretching vibration is clearly enhanced, which activates the surface of the MWCNTs and increases the number of Ag+ nucleation sites on the surface of the MWCNTs. At temperatures lower than 260 °C, the mass loss of Ag/MWCNTs composite is less than that of MWCNTs. Finally, three silver-epoxy resin pastes were separately prepared, and the paste prepared using the Ag/MWCNTs composites has the lowest resistivity and the highest thermal conductivity. |
| |
| Keywords: | MWCNTs ball milling iodination Ag/MWCNTs composite silver-epoxy resin paste |
|
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
|
