| 正交法在粉末药型罩制备工艺中的应用 |
| |
| 引用本文： | 刘迎彬,王凤英,刘天生.正交法在粉末药型罩制备工艺中的应用[J].弹箭与制导学报,2009,29(6). |
| |
| 作者姓名： | 刘迎彬 王凤英 刘天生 |
| |
| 作者单位： | 中北大学化工与环境学院,太原,030051 |
| |
| 摘 要： | 为了分析影响粉末药型罩性能的工艺参数,优化粉末药型罩制备工艺,提高粉末药型罩的质量.利用正交试验设计法确定了试验方案,根据试验方案完成了射流侵彻试验,并根据试验结果进行了数据分析.分析表明:4个因素的影响程度大小依次为药型罩材料成分配比、烧结温度、球磨时间、成型压力.根据试验结果分析,确定了较优的粉末药型罩生产工艺条件并进行了验证试验.通过试验可以得知,粉末药型罩的最优工艺条件为:药型罩材料成分配比为W:Cu:Bi=60:30:10,球磨时间为60min,成型压力为10MPa,烧结温度为200℃.
|
| 关 键 词： | 粉末药型罩 正交法 聚能装药 爆炸力学 |
Orthogonal Method Application to Powder Shaped Charge Liner Preparation |
| |
| LIU Yingbin,WANG Fengying,LIU Tiansheng.Orthogonal Method Application to Powder Shaped Charge Liner Preparation[J].Journal of Projectiles Rockets Missiles and Guidance,2009,29(6). |
| |
| Authors: | LIU Yingbin WANG Fengying LIU Tiansheng |
| |
| Affiliation: | LIU Yingbin,WANG Fengying,LIU Tiansheng (School of Chemical Engineering , Environment,North University of China,Taiyuan 030051,China) |
| |
| Abstract: | In order to analyze the process parameters that impact the performance of shaped charge liner,optimize preparation process,and improve its quality.Orthogonal experimental design method was applied to shaped charge liner technology research. According to a test scheme,the jet penetration test was completed and test results were in accordance with data analysis. It showed that:the sizes of the influence degree of four factors were the proportion of components of shaped charge liner material,sintering temperat... |
| |
| Keywords: | powder shaped charge liner orthogonal method shaped charge explosion mechanics |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
