| 基于CHS与Pro/E_cabling电气系统线缆线束数字化设计 |
| |
| 引用本文： | 王美靖,李怡麒,李鑫,刘新政.基于CHS与Pro/E_cabling电气系统线缆线束数字化设计[J].车辆与动力技术,2013(3):43-45. |
| |
| 作者姓名： | 王美靖 李怡麒 李鑫 刘新政 |
| |
| 作者单位： | 中国北方车辆研究所,北京,100072;中国北方车辆研究所,北京,100072;中国北方车辆研究所,北京,100072;中国北方车辆研究所,北京,100072 |
| |
| 摘 要： | 车辆电气系统的线束线缆设计主要是基于AutoCAD的二维设计,这需要花费大量时间来完成从原理图-接线原理图-线束加工图的整个设计过程.而且,对于所设计的线束是否正确没有一定的措施来监控,从而导致线缆一旦出现接线错误,将很难发现并予以排除.此外,在二维设计与三维设计、设计与仿真、设计与加工制造等环节上都存在脱节问题,限制了设计效率和质量的提高.为此,将美国mentor公司的CHS(Capital Harness System)线缆线束设计软件与PTC公司的Pro/E_Cabling模块结合起来,实现线缆线束自顶向下的从二维接线原理图到三维整车布线图再到线缆加工二维图的一体化设计,大大提高了设计的可靠性和后续的维护效率.
|
| 关 键 词： | 车辆电气系统 线缆线束设计 自顶向下 三维布线 CHS 数字化设计 |
Digital Design of Cabling for Vehicle Electrical System by CHS and Pro/E_ cabling |
| |
| WANG Mei-jing
,
LI Yi-qi
,
LI Xin
,
LIU Xin-Zheng.Digital Design of Cabling for Vehicle Electrical System by CHS and Pro/E_ cabling[J].Vehicle & Power Technology,2013(3):43-45. |
| |
| Authors: | WANG Mei-jing LI Yi-qi LI Xin LIU Xin-Zheng |
| |
| Affiliation: | (China North Vehicle Research Institute, Beijing 100072, China) |
| |
| Abstract: | Abstract： The cabling diagram for vehicle electrical system is mainly drawed by the software of AutoCAD, which will cost lots of time and energy to complete the process of schematic diagram-wiring diagram-cable diagram. Besides, due to no monitoring measure, it＇ s very difficult to find the design error and solve it. On the other hand, three-dimension design, simulation and production can＇ t be consideredat the same time in two-dimensional design, so the design quality and work rate are reduced. The digital design of cabling by CHS and Pro/E_cabling is showed. The digital design method integrates two- dimension with three-dimension, and it will increase the design reliability and maintenance efficiency. |
| |
| Keywords: | vehicle electrical system design of cabling top to down three-dimensional cable capitalharness system digital design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
