| 超微 Al_2O_3 粉热压烧结陶瓷的性能 |
| |
| 引用本文： | 郑秀华,钟家湘.超微 Al_2O_3 粉热压烧结陶瓷的性能[J].兵器材料科学与工程,1997,20(1):47-50. |
| |
| 作者姓名： | 郑秀华 钟家湘 |
| |
| 作者单位： | 北京理工大学 |
| |
| 摘 要： | 采用超微Ａｌ２Ｏ３粉和热压烧结工艺制备出两种Ａｌ２Ｏ３基陶瓷（Ａｌ２Ｏ３－ＭｇＯ－ＴｉＣ、Ａｌ２Ｏ３－ＭｇＯ－ＴｉＣ－Ｙ－ＰＳＺ）。研究了这两种材料烧结体的密度、显微组织和力学性能。并将烧成陶瓷加工成切削刀片，对３５ＣｒＭｎＳｉＡ超高强度调质钢进行切削试验，所得结果与其它几种陶瓷刀具的切削性能进行了比较。
|
| 关 键 词： | 超微粉料 热压烧结 机械性能 Al_2O_3 |
MECHANICAL PROPERTIES OF Al 2O 3 CERAMICS PREPARED WITH ULTRAFINE Al 2O 3 POWDERS |
| |
| Zheng Xiuhua.MECHANICAL PROPERTIES OF Al 2O 3 CERAMICS PREPARED WITH ULTRAFINE Al 2O 3 POWDERS[J].Ordnance Material Science and Engineering,1997,20(1):47-50. |
| |
| Authors: | Zheng Xiuhua |
| |
| Affiliation: | Zheng Xiuhua,Department of Mechanical Engineering,Beijing Institute of Technology,Beijing 100081,Zhong Jiaxiang,Wang Xiaodong |
| |
| Abstract: | Mechanical properties of Al 2O 3/TiC (AMT) and Al 2O 3/TiC/ZrO 2(AZT) ceramics prepared with ultrafine Al 2O 3 powders were investigated. The results showed that the densification temperatures for the two materials can be effectively decreased. At relatively low sintering temperatures, the sintered bodies had higher densities and finer grain sizes than those prepared with Al 2O 3 micropowders, which resulted in the improvements in both hardness and toughness of the ceramics. The best toughness was obtained from AMT hot pressing at 1600℃. Both AMT and AZT showed better cutting properties at medium and high cutting speeds than some commercial Al 2O 3 ceramics. |
| |
| Keywords: | ultrafine powder hot pressing mechanical property Al 2O 3 |
| 本文献已被 CNKI 维普 等数据库收录！ |
