| Ti－17合金热变形图与显微组织的对应关系 |
| |
| 引用本文： | 曾卫东,胡鲜红.Ti－17合金热变形图与显微组织的对应关系[J].兵器材料科学与工程,1996,19(6):10-14. |
| |
| 作者姓名： | 曾卫东 胡鲜红 |
| |
| 作者单位： | 西北工业大学 |
| |
| 摘 要： | 基于Ｐｒａｓａｄ等人提出的动态模拟材料模型，建立了Ｔ－１７合金在温度８０５～９４５℃、应变速率０．００１～８０ｓ（－１）范围内的热变形图。通过对能量耗散率η和组织变化分析，研究了组织稳定和失稳的参数范围。结果表明、热变形图与（α＋β）区和β区变形所得的组织完全吻合。
|
| 关 键 词： | Ti－17合金，热变形图，能量耗散率，动态再结晶，连续再结晶 |
CORRELATION OF HOT PROCESSING MAP AND MICROSTRUCTURE OF Ti-17 ALLOY |
| |
| Zeng Weidong.CORRELATION OF HOT PROCESSING MAP AND MICROSTRUCTURE OF Ti-17 ALLOY[J].Ordnance Material Science and Engineering,1996,19(6):10-14. |
| |
| Authors: | Zeng Weidong |
| |
| Abstract: | The correlation of hot processing map and microstructure of Ti-17(Ti-5A1-2Sn-2Zr-Cr-4Mo) alloy at the temperature range from 805℃ to 945℃, strain rate from 0.001s-1 to 80s-1 has been investigated based on the dynamic modeling of material behavior proposed by Y.V.R.K. Prasad. With the discussion of the efficiency of power dissipation and merostructure evolution, the optimum hot working parameters deformed in both alpha-deta region and deta region are identified. As expected, the resulting microstructure is consist with the hot processing map. |
| |
| Keywords: | s: Ti-17 alloy hot process ng map efficiency of power dispation continuous reerystallization dynamic recrystallization |
| 本文献已被 CNKI 维普 等数据库收录！ |
