首页 | 本学科首页   官方微博 | 高级检索  
     

铸态Al_(63)Cul_(25)Fel_(12)准晶材料的相分析及微观结构研究
引用本文:段亚萍,侯华,靳玉春,赵宇宏,傅利,杨东然.铸态Al_(63)Cul_(25)Fel_(12)准晶材料的相分析及微观结构研究[J].兵器材料科学与工程,2014(2).
作者姓名:段亚萍  侯华  靳玉春  赵宇宏  傅利  杨东然
作者单位:中北大学材料科学与工程学院;中北大学特种液态成形技术研究中心;
基金项目:国家自然科学基金(51204147,51274175);科技部国际科技合作项目(2011DFA50520);山西省回国留学人员重点科研资助(2011-key6)
摘    要:采用普通铸造法在真空中频熔炼炉中制备了Al63Cu25Fe12准晶合金试样,利用光学显微镜、扫描电镜、能谱分析仪和X衍射衍射仪,分析了准晶相和其它类似相的微观组织及相的变化。结果表明:铸态Al63Cu25Fe12准晶合金主要由λ相、I相、β相和其它微量相组成;采用各部位冷却速度不同的圆台式浇铸模具对合金进行浇铸,冷却速度较快的铸锭底部准晶I相的含量低于冷却速度较慢的铸锭顶部;Al63Cu25Fe12准晶合金经过750℃×8 h的退火处理后,λ相、β相及其它微量相有向准晶I相变化的趋势。

关 键 词:准晶  铸态Al63Cu25Fe12合金  相分析  冷却速度  退火处理

Phase analysis and microstructure of as-cast AlPhase Al_(63)Cul_(25)Fel_(12) quasicrystalline material
Abstract:Al63Cu25Fe12 quasicrystalline material was prepared by vacuum furnace. The microstructure and phase changes of quasicrystalline and other similar phases were studied by means of OM,SEM,EDS and XRD. The study shows that as-cast Al63Cu25Fe12 quasicrystalline material is composed of λ,β,quasicrystalline I and other little phases. The truncated cone casting die with different cooling rates in different areas was used to cast. The quantity of quasicrystalline I in the casting bottom(higher cooling rate area)is lower than that in the casting top(lower cooling rate area)After annealing treatment at 750 ℃×8 h,λ,β and other phases trend to transform into I phase.
Keywords:quasicrystalline  as-cast Al63Cu25Fe12 alloy  phase analysis  cooling rate  annealing treatment
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号