首页 | 本学科首页   官方微博 | 高级检索  
     

汽车发动机皮带轮表面缺陷原因分析
引用本文:陈耘,段莉萍,元涛,陈敏,周灵展,张晨东.汽车发动机皮带轮表面缺陷原因分析[J].兵器材料科学与工程,2011,34(3):73-76.
作者姓名:陈耘  段莉萍  元涛  陈敏  周灵展  张晨东
作者单位:中国兵器科学研究院,宁波分院,浙江,宁波,315103;中国兵器科学研究院,宁波分院,浙江,宁波,315103;中国兵器科学研究院,宁波分院,浙江,宁波,315103;中国兵器科学研究院,宁波分院,浙江,宁波,315103;中国兵器科学研究院,宁波分院,浙江,宁波,315103;中国兵器科学研究院,宁波分院,浙江,宁波,315103
摘    要:某汽车发动机皮带轮在加工过程中,近50%的零件表面发现有微裂纹。用金相显微镜、扫描电镜和超声波C扫描等分析仪器,研究汽车发动机皮带轮表面缺陷的形成原因。结果表明,零件表面的缺陷是钢管原材料在冶炼浇注过程中混入的硅酸盐类粗夹杂形成的。

关 键 词:表面缺陷  粗夹杂  硅酸盐  皮带轮

Analysis on surface flaw of belt roller of automobile engine
CHEN Yun,DUAN Liping,YUAN Tao,CHEN Min,ZHOU Lingzhan,ZHANG Chendong.Analysis on surface flaw of belt roller of automobile engine[J].Ordnance Material Science and Engineering,2011,34(3):73-76.
Authors:CHEN Yun  DUAN Liping  YUAN Tao  CHEN Min  ZHOU Lingzhan  ZHANG Chendong
Affiliation:CHEN Yun,DUAN Liping,YUAN Tao,CHEN Min,ZHOU Lingzhan,ZHANG Chendong (Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China)
Abstract:About 50 percents of micro-crack flaw were detected in the manufacturing processing of belt roller of automobile engine.The forming reasons of surface flaw on the belt roller of automobile engine were analyzed by using metallographic microscope,scanning electronic microscope and ultrasonic wave C-scan.The results indicate that the surface flaws on belt roller are caused by metasilicate coarse inclusion introduced in the smelting process of steel pipe raw materials.
Keywords:surface defect  coarse inclusion  silicate  belt roller  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号