| 消失模法铸渗表面合金层组织研究 |
| |
| 引用本文： | 袁中岳,张忠明,李朝升,林尤栋. 消失模法铸渗表面合金层组织研究[J]. 兵器材料科学与工程, 2002, 25(4): 36-39. DOI: 10.3969/j.issn.1004-244X.2002.04.010 |
| |
| 作者姓名： | 袁中岳 张忠明 李朝升 林尤栋 |
| |
| 作者单位： | 1. 西安理工大学,材料科学与工程学院,西安,710048;2. 中国科学院,合肥固体物理研究所,合肥,230031 |
| |
| 基金项目： | 陕西省教育厅资助项目;99JK223; |
| |
| 摘 要： | 利用消失模铸造法制备了表面耐磨合金材料,并研究了其组织与性能.结果表明铸渗合金层由表向内,碳化物类型由M7C3型向M3C型转变,硬度逐渐降低,碳化物含量逐渐减少;热处理后,碳化物含量和材料硬度增加,但铸渗层由外向里碳化物含量与硬度逐渐降低及碳化物由M7C3型向M3C型转变这一趋势不变.
|
| 关 键 词： | 复合材料 铸渗表面合金化 消失模铸造 |
| 文章编号： | 1004-244X(2002)04-0036-04 |
| 修稿时间： | 2002-03-01 |
Microstructures of surface alloying layer prepared by evaporable pattern casting process |
| |
| YUAN Zhong-yue ,ZHANG Zhong-ming ,LI Chao-sheng ,LIN You-dong. Microstructures of surface alloying layer prepared by evaporable pattern casting process[J]. Ordnance Material Science and Engineering, 2002, 25(4): 36-39. DOI: 10.3969/j.issn.1004-244X.2002.04.010 |
| |
| Authors: | YUAN Zhong-yue ZHANG Zhong-ming LI Chao-sheng LIN You-dong |
| |
| Affiliation: | YUAN Zhong-yue 1,ZHANG Zhong-ming 1,LI Chao-sheng 2,LIN You-dong 1 |
| |
| Abstract: | Wear-resistant alloying layers were prepared on the surfaces of castings by using Evaporable Pattern Casting process, the microstructures and properties of the layers were also investigated. The results show that from the outside to inside of the alloying layers, the carbide type transforms from M 7C 3 to M 3C, and the carbide content and the hardness of them decrease gradually; after being heat-treated, the carbide content and the hardness of the alloying layers increase, while the phenomena that the carbide type changes and the carbide content and the hardness of the layers decrease gradually remain unchanged. |
| |
| Keywords: | composite surface alloying evaporable pattern casting process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
