| 镀铜二硼化钛-碳纤维增强铜-石墨基复合材料的性能研究 |
| |
| 引用本文： | 赵清碧,许少凡,江沣,袁传勇.镀铜二硼化钛-碳纤维增强铜-石墨基复合材料的性能研究[J].兵器材料科学与工程,2009,32(1):67-69. |
| |
| 作者姓名： | 赵清碧 许少凡 江沣 袁传勇 |
| |
| 作者单位： | 合肥工业大学材料学院,安徽,合肥,230009;合肥工业大学材料学院,安徽,合肥,230009;合肥工业大学材料学院,安徽,合肥,230009;合肥工业大学材料学院,安徽,合肥,230009 |
| |
| 摘 要： | 研究了在铜-石墨基复合材料中用镀铜TiB2和碳纤维取代一部分石墨后对复合材料密度、电阻率、硬度和抗弯强度的影响。结果表明:用2%的碳纤维取代部分石墨后,随着镀铜TiB2的含量增加到2%时,其复合材料的密度比原来提高2%,电导率提高31%,硬度提高26%,抗弯强度提高8%。
|
| 关 键 词： | 镀铜TiB2 碳纤维 铜-石墨基复合材料 性能 |
Studies on properties of copper coated TiB_2 and carbon fiber reinforced copper-graphite composites |
| |
| ZHAO Qingbi,XU Shaofan,JIANG Feng,YUAN Chuanyong.Studies on properties of copper coated TiB_2 and carbon fiber reinforced copper-graphite composites[J].Ordnance Material Science and Engineering,2009,32(1):67-69. |
| |
| Authors: | ZHAO Qingbi XU Shaofan JIANG Feng YUAN Chuanyong |
| |
| Affiliation: | School of Material Science and Engineering;Hefei University of Technology;Hefei 230009;China |
| |
| Abstract: | The properties of copper-graphite composite materials in which part of graphite was replaced by copper coating TiB2 and carbon fiber were studied,including density, resistivity, hardness and the bending strength.The result shows that after substituting 2% carbon fiber for some of graphite, with the content of copper coating TiB2 increasing to 2% , the density, conductive rate, hardness and the bending strength of the composite material increases 2%,31%,26% and 8% respectively. |
| |
| Keywords: | copper-coated TiB2 carbon fiber copper-graphite composites properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
