|
|||||
|
|
| 火炮身管弯曲度检测方法研究 | |
| 引用本文： | 杨惠勇,张培林,阎鹏程,傅建平,孔国杰.火炮身管弯曲度检测方法研究[J].兵工自动化,2008,27(9):19-21. |
| 作者姓名： | 杨惠勇 张培林 阎鹏程 傅建平 孔国杰 |
| 作者单位： | 1. 军械工程学院,自行火炮教研室,河北,石家庄,050003;军械工程学院,军械技术研究所,河北,石家庄,050003 2. 军械工程学院,自行火炮教研室,河北,石家庄,050003 3. 军械工程学院,军械技术研究所,河北,石家庄,050003 |
| 摘 要： | 为实现对火炮身管弯曲度的非接触无损检测，提出不完全整体式结构下的检测方法。利用半导体激光准直光束作为测量参考基准，位置敏感探测器（PSD）作为接受器件，应用单片机实现系统的总体控制，最大程度减化系统外部结构。建立系统数学模型，实现火炮身管直线度的非接触无损自动检测，最终达到预期的效果。 |
| 关 键 词： | 火炮身管 弯曲度 数学模型 PSD 检测方法 |
Research on Gun Bore's Flexure Degree Detecting Method |
|
| YANG Hui-yong,ZHANG Pei-lin,YAN Peng-cheng,FU Jian-ping,KONG Guo-jie.Research on Gun Bore''s Flexure Degree Detecting Method[J].Ordnance Industry Automation,2008,27(9):19-21. | |
| Authors: | YANG Hui-yong ZHANG Pei-lin YAN Peng-cheng FU Jian-ping KONG Guo-jie |
| Affiliation: | YANG Hui-yong, ZHANG Pei-lin, YAN Peng-cheng, FU Jian-ping, KONG Guo-jie(1. Staff Room of Self-Driven Artillery, Ordnance Engineering College, Shijiazhuang 050003, China; 2. Ordnance Technological Research Institute, Ordnance Engineering College, Shijiazhuang 050003, China) |
| Abstract: | To realize a non-destructive detection for flexure degree of gun bore, a detecting method based on incomplete whole type structure is put forward. Adopt semi-conductor laser collimation light beam as measurement reference basis and position sensitive detector （PSD） as receive spare part, use single chip to carry out the total control of system, and furthest simplify the system＇s exterior structure. Through a mathematic model＇s establishment a non-destructive detecting method for gun bore＇s flexure degree is realized. An anticipant effect is completed by this method. |
| Keywords: | Gun tube Flexure degree Mathematic model PSD Detecting method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |