药型罩锥角对聚能杆式侵彻体影响的数值分析 |
| |
引用本文: | 崔魁文,米双山,高敏.药型罩锥角对聚能杆式侵彻体影响的数值分析[J].兵工自动化,2018,37(11). |
| |
作者姓名: | 崔魁文 米双山 高敏 |
| |
作者单位: | 陆军工程大学石家庄校区导弹工程系,石家庄,050003;陆军工程大学石家庄校区导弹工程系,石家庄,050003;陆军工程大学石家庄校区导弹工程系,石家庄,050003 |
| |
摘 要: | 为研究药型罩锥角对聚能杆式侵彻体的影响,运用AUTODYN 软件建立聚能装药模型,对90?~130?大
锥角药型罩形成的聚能杆式侵彻体进行数值模拟。建立装药结构有限元模型,研究不同锥角药型罩形成的聚能杆式
侵彻体在同一时刻、同一炸高下的成型情况,分析在5 倍装药口径炸高条件下聚能杆式侵彻体对均质靶板的侵彻情
况,得到在装药口径和高度一定的前提条件下,药型罩锥角对聚能杆式侵彻体成型参数的影响规律。研究结果表明:
药性罩锥角在100?~110?时,形成的聚能杆式侵彻体具有较好的连续性、稳定性与侵彻性能,可为聚能杆式侵彻体
战斗部的设计及应用提供参考。
|
关 键 词: | 聚能杆式侵彻体 药型罩 锥角 数值模拟 侵彻 |
收稿时间: | 2018/9/5 0:00:00 |
修稿时间: | 2018/9/22 0:00:00 |
Numerical Analysis on Effect of Jetting Projectile Charge by Liner Cone Angle |
| |
Abstract: | In order to study the effect of cone angle of the liner on jetting projectile charge (JPC), AUTODYN
simulation software is used to build the shaped charge model. Numerical simulation of the jetting projectile charge with the
large angle between 90?-130? of the liner is performed. The jetting projectile charge molding with different liner angle at
the same time and the same burst height is studied, and the penetration of the homogeneous target is analyzed under the
condition that the burst height is 5 times of the charge diameter. Under the same diameter and height of shaped charge, the
effect laws of cone angle of the liner on the jetting projectile charge molding parameters are proposed. The research also
shows that the jetting projectile charge has better continuity, stability and penetration performance when the liner angle is
100?-110?. The results provide a reference for design and application of jetting projectile charge warhead. |
| |
Keywords: | JPC liner cone angle numerical simulation penetration |
本文献已被 万方数据 等数据库收录! |
| 点击此处可从《兵工自动化》浏览原始摘要信息 |
|
点击此处可从《兵工自动化》下载全文 |
|