| BTA深孔加工钻杆系统的稳定性及分岔 |
| |
| 引用本文： | 孔令飞,李言,吕延军.BTA深孔加工钻杆系统的稳定性及分岔[J].兵工学报,2009,30(12):1684-1690. |
| |
| 作者姓名： | 孔令飞 李言 吕延军 |
| |
| 作者单位： | 西安理工大学,机械与精密仪器工程学院,陕西,西安,710048;西安理工大学,机械与精密仪器工程学院,陕西,西安,710048;西安理工大学,机械与精密仪器工程学院,陕西,西安,710048 |
| |
| 基金项目： | 国家重点基础研究发展规划(973计划)，陕西省自然科学基金 |
| |
| 摘 要： | 研究了BTA深孔加工钻杆系统的稳定性和分岔。考虑了钻杆质量偏心和切削力波动的影响，利用切削液非线性流体力以增加数值计算的精度。通过引入变分约束原理的有限元方法，同时完成了非线性分析所需的流体力及其Jacobian矩阵的计算。在稳定性分析中，通过改变系统的时间尺度，将非线性钻杆系统周期轨迹的周期显式地出现在钻杆系统的系统方程中；然后对传统打靶法进行改造j将周期也作为一个参数一起加入打靶法的迭代过程，确定了钻杆运行周期轨迹并有效减少了周期计算量。结合Floquet稳定性理论，将理论计算与实验结果相结含验证了上述方法的正确性和有效性。
|
| 关 键 词： | 机械制造工艺与设备 深孔加工 钻杆 非线性动力学 稳定性 分岔 |
Stability and Bifurcation of the Drilling Shaft System in Processing Deep Hole Based on Boring and Trepanning Association |
| |
| KONG Ling-fei,LI Yan,L Yan-jun.Stability and Bifurcation of the Drilling Shaft System in Processing Deep Hole Based on Boring and Trepanning Association[J].Acta Armamentarii,2009,30(12):1684-1690. |
| |
| Authors: | KONG Ling-fei LI Yan L Yan-jun |
| |
| Affiliation: | School of Mechanic and Precision Instrument Engineer, Xi'an University of Technology, Xi’an 710048，Shaanxi, China |
| |
| Abstract: | The stability and bifurcation of the drilling shaft system in processing deep hole based on boring and trepanning association were analyzed.Taking effects of the mass eccentricity and the cutting force fluctuating on the stability and bifurcation into account,nonlinear hydrodynamic force was adopted to increase the numerical accuracy.Based on the isoparametric finite element with eight node method,the nonlinear hydrodynamic force and their Jacobian matrices of compatible accuracy were calculated simultaneou... |
| |
| Keywords: | manufacturing processes and equipment deep hole drilling drilling shaft nonlinear dynamics stability bifurcation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《兵工学报》浏览原始摘要信息 |
|
点击此处可从《兵工学报》下载全文 |
