首页 | 本学科首页   官方微博 | 高级检索  
     

基于等效载荷的零件可靠性分析
引用本文:高鹏,谢里阳.基于等效载荷的零件可靠性分析[J].兵工学报,2010,31(5):641-645.
作者姓名:高鹏  谢里阳
作者单位:东北大学,机械工程与自动化学院,辽宁,沈阳,110004;东北大学,机械工程与自动化学院,辽宁,沈阳,110004
基金项目:国家高技术研究发展计划项目 
摘    要:研究了考虑强度退化时零件可靠度与载荷作用次数和时间的关系。当强度退化时,传统的载荷-强度干涉模型不能用于计算随机载荷多次作用时的可靠度。考虑载荷对零件造成的损伤,提出了基于等效载荷的可靠度计算模型。当载荷历程为泊松过程时,在强度为载荷作用次数和载荷大小的函数的前提下,得到时变可靠度计算模型。此外,当零件同时承受工作载荷和来自工作环境的载荷时,建立了多个载荷作用下的零件时变可靠度计算模型。数值算例表明,强度退化对于可靠性评估有着重要的影响。提出的模型适用于计算考虑强度退化时的可靠性变化规律。

关 键 词:机械学  可靠度  强度退化  等效载荷  泊松过程

Analysis of Component Reliability Based on Equivalent Load
GAO Peng,XIE Li-yang.Analysis of Component Reliability Based on Equivalent Load[J].Acta Armamentarii,2010,31(5):641-645.
Authors:GAO Peng  XIE Li-yang
Affiliation:(School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, Liaoning, China)
Abstract:The relationship between reliability and loading times,considered the strength degradation,was studied.When strength degrades and random loading acts many times,the traditional load-strength interference model can not be applied to the reliability calculation.Taking the damage caused by random loading,a reliability model based on the equivalent load was proposed.When the loading process is a Poisson process,a time-dependent reliability model could be used,assuming that the strength is the function of loadin...
Keywords:mechanics  reliability  strength degradation  equivalent load  Poisson process  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《兵工学报》浏览原始摘要信息
点击此处可从《兵工学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号