| 炮钢材料动态本构模型及其验证 |
| |
| 引用本文： | 曾志银,高小科,刘朋科,喻华萨.炮钢材料动态本构模型及其验证[J].兵工学报,2015,36(11):2038-2044. |
| |
| 作者姓名： | 曾志银 高小科 刘朋科 喻华萨 |
| |
| 作者单位： | 西北机电工程研究所,陕西咸阳,712099;西北机电工程研究所,陕西咸阳,712099;西北机电工程研究所,陕西咸阳,712099;西北机电工程研究所,陕西咸阳,712099 |
| |
| 基金项目： | 国家"973"计划项目 |
| |
| 摘 要： | 在温度88~573 K和应变率0.001~2 000 s~(-1)的条件下,通过温度与应变率耦合的静态和动态分离式Hopkinson压杆实验,并以初步获得的炮钢材料动态本构模型基本参数为基础,通过进一步的优化及Taylor杆冲击实验,验证并最终确认了炮钢材料动态本构模型参数,模型预测与实验结果相对误差小于5%.验证结果表明,建立的炮钢材料动态本构模型能真实地反映其动态响应。
|
| 关 键 词： | 兵器科学与技术 炮钢材料 本构模型 Hopkinson压杆实验 Taylor杆冲击实验 |
Dynamic Constitutive Model of Gun Steel Material and Its Verification |
| |
| ZENG Zhi-yin,GAO Xiao-ke,LIU Peng-ke,YU Hua-sa.Dynamic Constitutive Model of Gun Steel Material and Its Verification[J].Acta Armamentarii,2015,36(11):2038-2044. |
| |
| Authors: | ZENG Zhi-yin GAO Xiao-ke LIU Peng-ke YU Hua-sa |
| |
| Affiliation: | (Northwest Institute of Mechanical and Electrical Engineering, Xianyang 712099,Shaanxi, China) |
| |
| Abstract: | The static and dynamic SHPB (split Hopkinson pressure bar) tests are made on a gun steel material at the temperature of 88~573 K and the strain rate of 0.001~2 000 s-1. The preliminarily obtained parameters of constitutive model of some gun steel material are verified and confirmed by the optimization procedure and Taylor impact test. The difference between the predicted and experimental results is less than 5%. The experimental results show that the proposed dynamic constitutive model can reflect the dynamic response of gun steel material under loads effectively. |
| |
| Keywords: | ordnance science and technology gun steel material constitutive model Hopkinson pressure bar test Taylor impact test |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《兵工学报》浏览原始摘要信息 |
|
点击此处可从《兵工学报》下载全文 |
|
