| 电镀金刚石线锯锯切轨迹的研究 |
| |
| 引用本文： | 张辽远,褚桂君,慕丽.电镀金刚石线锯锯切轨迹的研究[J].兵工学报,2011,32(5):607-612. |
| |
| 作者姓名： | 张辽远 褚桂君 慕丽 |
| |
| 作者单位： | （沈阳理工大学 机械工程学院, 辽宁 沈阳 110159) |
| |
| 基金项目： | 辽宁省创新团队项目(2008T164) |
| |
| 摘 要： | 基于冲量理论和振动加工理论,对电镀金刚石线锯锯切过程进行了分析,并对锯切过程中各个阶段的接触状态进行了有限元计算,得出在稳定接触状态下应力沿工件宽度方向分布均匀的结论.结合电镀金刚石锯切实验,采用叠加原理建立了锯切轨迹的数学方程,得到了轨迹计算曲线.通过与实际切割轨迹形貌的对比,计算曲线和实际轨迹曲线之间的误差小于15...
|
| 关 键 词： | 机械制造工艺与设备 电镀金刚石线锯 锯切轨迹 应力分析 轨迹方程 |
Research on the Sawing Trajectory of Electroplated Diamond Wire Saw |
| |
| ZHANG Liao-yuan,CHU Gui-jun,MU Li.Research on the Sawing Trajectory of Electroplated Diamond Wire Saw[J].Acta Armamentarii,2011,32(5):607-612. |
| |
| Authors: | ZHANG Liao-yuan CHU Gui-jun MU Li |
| |
| Affiliation: | (School of Mechanical Engineering, Shenyang Ligong Universcity, Shenyang 110159, Liaoning, China) |
| |
| Abstract: | The cutting process of electroplated diamond wire saw was researched based on impulse and vibration machining theories.From the finite element calculation of different contact states in the cutting process,it is shown that the cutting stress is uniformly distributed along the direction of the workpiece width in a steady state.The mathematical equation of sawing trajectory was established using a superposition principle through the cutting experiment of diamond wire saw,and the trajectory curve was calculate... |
| |
| Keywords: | machinofature technique and equipment electroplated diamond wire saw sawing trajectory stress analysis trajectory equation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《兵工学报》浏览原始摘要信息 |
|
点击此处可从《兵工学报》下载全文 |
|
