首页 | 本学科首页   官方微博 | 高级检索  
     

弹丸对加筋板穿甲的数值模拟研究
引用本文:杨世全,唐平,谌勇. 弹丸对加筋板穿甲的数值模拟研究[J]. 含能材料, 2007, 15(6): 561-565
作者姓名:杨世全  唐平  谌勇
作者单位:中国工程物理研究院总体工程研究所,四川,绵阳,621900;上海交通大学振动冲击噪声国家重点实验室,上海,200040
基金项目:NSAF联合基金项目资助(10276040)
摘    要:根据舰船上加筋板壳结构在强冲击载荷作用下的变形以及破坏过程,结合加筋板受弹丸穿甲的实验研究,采用数值模拟方式,对加筋板受到弹丸攻击时,靶板破坏模式、弹丸过靶姿态以及靶板抗穿透能力等进行了研究。结果表明,筋板的存在,使得靶板强度和刚度都得到了较大提高,靶板整体结构性能以及破坏模式发生了较大变化,"一""T""十"字加筋使弹丸极限穿靶速度的提高量随筋板和弹丸的不同在35%~80%之间变化,弹丸的最大偏转角达到了35°~40°。

关 键 词:爆炸力学  弹丸  加筋板  冲击载荷  穿甲  数值模拟
文章编号:1006-9941(2007)06-0561-05
收稿时间:2007-03-06
修稿时间:2007-05-20

Numerical Investigation on Perforation of Projectile Impacting Stiffened Plate
YANG Shi-quan,TANG Ping and CHEN Yong. Numerical Investigation on Perforation of Projectile Impacting Stiffened Plate[J]. Chinese Journal of Energetic Materials, 2007, 15(6): 561-565
Authors:YANG Shi-quan  TANG Ping  CHEN Yong
Abstract:Based on the experimental perforation of projectile impacting stiffened plate, numerical simulations were conducted to study the failure pattern of target, projectile trajectory and the anti-perforation capability of target. The results show that stiffeners enhance the strength and rigidity of target, and change the whole structure capability and the failure pattern of target. For the single stiffened plate, single stiffened plate with "T" sectioned stiffener and cross stiffened plate, the increase of limit penetration velocity for different stiffeners and projectiles is 35%~80%. The maximum deflexion angle of projectile is 35°~40°.
Keywords:explosion mechanics  projectile  stiffened plate  impact load  perforation  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《含能材料》浏览原始摘要信息
点击此处可从《含能材料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号