首页 | 本学科首页   官方微博 | 高级检索  
     

脉冲等离子射流在液体介质中扩展特性的测量与分析
引用本文:刘怡,余永刚,莽珊珊.脉冲等离子射流在液体介质中扩展特性的测量与分析[J].含能材料,2017,25(2):144-149.
作者姓名:刘怡  余永刚  莽珊珊
作者单位:1. 南京理工大学能源与动力工程学院,江苏 南京,210094;2. 南京理工大学理学院,江苏 南京,210094
基金项目:国家自然科学基金(51506094)
摘    要:为了深入了解液体工质电热化学炮的燃烧推进机理,设计了模拟实验装置。采用高速录像系统,观察了脉冲等离子射流喷入液体介质中的扩展过程。测量了脉冲等离子射流在液体介质中形成Taylor空腔的轴向位移和体积变化。得到了Taylor空腔体积随时间变化的定量扩展规律。讨论了贮液室边界形状、放电电压和喷嘴直径对等离子射流扩展的影响。结果表明,两相交界处由于湍流掺混形成皱褶不光滑的交界面。Taylor空腔扩展过程中出现了明显的振荡现象。渐扩结构因子由0.6减小到0.4,轴向位移第一峰值和体积第一峰值分别增大16.6%和12.4%。放电电压由3000 V减小到2100 V,轴向位移第一峰值和体积第一峰值分别减小36.1%和60.7%。喷嘴直径由2 mm减小到1.5 mm,轴向位移第一峰值和体积第一峰值分别减小27.2%和56.7%。

关 键 词:电热化学发射  等离子射流  液体介质  Taylor空腔  扩展特性
收稿时间:2016/9/23 0:00:00
修稿时间:2016/10/20 0:00:00

Measurement and Analysis of Expansion Characteristics of Pulsed Plasma Jet in Liquid Medium
LIU Yi,YU Yong-gang and MANG Shan-shan.Measurement and Analysis of Expansion Characteristics of Pulsed Plasma Jet in Liquid Medium[J].Chinese Journal of Energetic Materials,2017,25(2):144-149.
Authors:LIU Yi  YU Yong-gang and MANG Shan-shan
Affiliation:School of Energy and Power Engineering, NUST, Nanjing 210094, China,School of Energy and Power Engineering, NUST, Nanjing 210094, China and School of Science, NUST, Nanjing 210094, China
Abstract:To deeply understand the combustion and propulsion mechanism in liquid propellant electrothermal chemical gun, an experiment device was designed.The expansion process of injecting the pulsed plasma jet into the liquid medium was observed by a high-speed video system. The changes in axial displacement and volume of Taylor cavity formed by the interaction of plasma jet and liquid medium were measured. The quantitative expansion law for the change in Taylor cavity volume with time was obtained. The effects of liquid chamber boundary shape, discharge voltage and nozzle diameter on the pulsed plasma jet expansion were discussed . Results show that the non smooth intefacer with wrinkles in junction of two-phase due to the turbulent mixing is formed. There is an obvious oscillation phenomenon in the expansion process of Taylor cavity. The stepped-wall structure factor decreases from 0.6 to 0.4, the axial displacement first peak and the volume first peak increase by 16.6% and 12.4%, respectively. The discharge voltage decreases from 3000 V to 2100 V, the axial displacement first peak and the volume first peak reduce by 36.1% and 60.7%, respectively. The nozzle diameter decreases from 2 mm to 1.5 mm, the axial displacement first peak and the volume first peak reduce by 27.2% and 56.7% , respectively.
Keywords:electrothermal chemical propulsion  plasma jet  liquid medium  Taylor cavity  extended characteristic
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《含能材料》浏览原始摘要信息
点击此处可从《含能材料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号