首页 | 本学科首页   官方微博 | 高级检索  
     

小型引信电源冲击特性仿真研究
引用本文:王珍,刘更,冯虹,蒋国立.小型引信电源冲击特性仿真研究[J].探测与控制学报,2006,28(3):29-31.
作者姓名:王珍  刘更  冯虹  蒋国立
作者单位:西安机电信息研究所,陕西,西安,710065
摘    要:现代轻武器系统-单兵综合作战系统发射的榴弹口径仅有20mm、25mm;法国和美国装备的弹药最小口径也仅有20mm,要满足这样小的弹药的使用要求,关键技术之一就是电源小型化和耐高过载。文中应用大型有限元软件MSC.DYTRAN针对小型引信电源结构在不同冲击过载条件下的动态响应规律进行仿真研究,为推进引信电源小型化设计及工程应用研究奠定基础。

关 键 词:引信电源  有限元  仿真  冲击特性
文章编号:1008-1194(2006)03-0029-03
收稿时间:2006-01-06
修稿时间:2006年1月6日

Study on the Simulation of the Impact Characteristic and Structure Strength of Miniature Fuze Power Source
WANG Zhen,LIU Geng,FENG Hong,JIANG Guo-Li.Study on the Simulation of the Impact Characteristic and Structure Strength of Miniature Fuze Power Source[J].Journal of Detection & Control,2006,28(3):29-31.
Authors:WANG Zhen  LIU Geng  FENG Hong  JIANG Guo-Li
Abstract:Calibers of the high explosive shells launched by the modem light weapons system are 20mm, 25mm. The minimum caliber of the naval gun ammunition of France and US is 20mm only. To satisfy the operation requirements of such small caliber ammunition, the key technique is fuze miniaturization. The simulation of the dynamic response rule of the power source under the different impact overload condition is studied in the paper by means of finite element software MSC. DYTRAIV. Thus laying a foundation for the miniaturization design of the fuze power source and project application research.
Keywords:fuze power source  finite element  simulation  impact characteristic
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号